Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
Upgrade to 18.1 failed (Bad signature)
« previous
next »
Print
Pages: [
1
]
Author
Topic: Upgrade to 18.1 failed (Bad signature) (Read 6439 times)
marigo
Newbie
Posts: 5
Karma: 0
Upgrade to 18.1 failed (Bad signature)
«
on:
February 06, 2018, 11:45:07 am »
Hi all,
I want to upgrade to 18.1 but everytime I get this error message:
***GOT REQUEST TO UPGRADE: maj***
Fetching packages-18.1-OpenSSL-amd64.tar: .................................opnsense-verify: error:04091068:rsa routines:INT_RSA_VERIFY:bad signature
Signature is not valid
failed
***DONE***
What can I do about it?
Logged
phoenix
Hero Member
Posts: 545
Karma: 58
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #1 on:
February 06, 2018, 12:39:29 pm »
Have you tried a different mirror?
Logged
Regards
Bill
marigo
Newbie
Posts: 5
Karma: 0
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #2 on:
February 06, 2018, 12:53:46 pm »
No, I didn't.
Where do I change this and what choices do I have?
(noob)
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #3 on:
February 06, 2018, 01:04:02 pm »
From the web interface: System: Firmware: Settings
You could also try executing these commands from the console:
[removed]
... then reboot.
Please backup your settings first
«
Last Edit: February 06, 2018, 06:25:54 pm by elektroinside
»
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
phoenix
Hero Member
Posts: 545
Karma: 58
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #4 on:
February 06, 2018, 01:05:46 pm »
To specify a particular mirror go to System/Firmware/Updates and on the Settings tab you can choose another mirror, when you've selected one hit Save then try the update again.
Logged
Regards
Bill
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #5 on:
February 06, 2018, 01:08:02 pm »
If this doesn't work, you could try temporarily switching to the development version by running:
# opnsense-update -t opnsense-devel
If successful, from the GUI, switch back to production for a more stable version
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
marigo
Newbie
Posts: 5
Karma: 0
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #6 on:
February 06, 2018, 01:20:29 pm »
That did the trick. Thanks a lot!
Switched to ieji.de and the upgrade is now in progress.
Super, Thx again for support!
Logged
franco
Administrator
Hero Member
Posts: 17484
Karma: 1589
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #7 on:
February 06, 2018, 06:07:05 pm »
Quote from: elektroinside on February 06, 2018, 01:04:02 pm
***REDACTED***
User was attempting a major upgrade from 17.7 and this will "fake" an update to 18.1 and skip the base and kernel *if* the fingerprints are installed (like 17.7.12_1).
Please don't do this. pkg will probably break.
Cheers,
Franco
«
Last Edit: February 06, 2018, 07:47:11 pm by franco
»
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #8 on:
February 06, 2018, 06:26:57 pm »
Sorry Franco, removed my comment.
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
franco
Administrator
Hero Member
Posts: 17484
Karma: 1589
Re: Upgrade to 18.1 failed (Bad signature)
«
Reply #9 on:
February 06, 2018, 07:48:23 pm »
Blanked quote too. Better safe then sorry. Thanks!
For the OP: probably the wrong mirror. Would be good to know which, one in the past did not return the signatures in a raw format so the verification failed.
Cheers,
Franco
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
Upgrade to 18.1 failed (Bad signature)