OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: marigo on February 06, 2018, 11:45:07 am

Title: Upgrade to 18.1 failed (Bad signature)
Post by: marigo on February 06, 2018, 11:45:07 am

Hi all,

I want to upgrade to 18.1 but everytime I get this error message:

***GOT REQUEST TO UPGRADE: maj***
Fetching packages-18.1-OpenSSL-amd64.tar: .................................opnsense-verify: error:04091068:rsa routines:INT_RSA_VERIFY:bad signature
Signature is not valid
 failed
***DONE***

What can I do about it?

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: phoenix on February 06, 2018, 12:39:29 pm

Have you tried a different mirror?

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: marigo on February 06, 2018, 12:53:46 pm

No, I didn't.

Where do I change this and what choices do I have?

(noob)

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: elektroinside on February 06, 2018, 01:04:02 pm

From the web interface: System: Firmware: Settings

You could also try executing these commands from the console:

[removed]

... then reboot.

Please backup your settings first :)

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: phoenix on February 06, 2018, 01:05:46 pm

To specify a particular mirror go to System/Firmware/Updates and on the Settings tab you can choose another mirror, when you've selected one hit Save then try the update again.

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: elektroinside on February 06, 2018, 01:08:02 pm

If this doesn't work, you could try temporarily switching to the development version by running:

# opnsense-update -t opnsense-devel

If successful, from the GUI, switch back to production for a more stable version :)

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: marigo on February 06, 2018, 01:20:29 pm

That did the trick. Thanks a lot!  :)

Switched to ieji.de and the upgrade is now in progress.

Super, Thx again for support!

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: franco on February 06, 2018, 06:07:05 pm

Quote from: elektroinside on February 06, 2018, 01:04:02 pm

***REDACTED***

User was attempting a major upgrade from 17.7 and this will "fake" an update to 18.1 and skip the base and kernel *if* the fingerprints are installed (like 17.7.12_1).

Please don't do this. pkg will probably break.


Cheers,
Franco

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: elektroinside on February 06, 2018, 06:26:57 pm

Sorry Franco, removed my comment.

Title: Re: Upgrade to 18.1 failed (Bad signature)
Post by: franco on February 06, 2018, 07:48:23 pm

Blanked quote too. Better safe then sorry. Thanks! 8)

For the OP: probably the wrong mirror. Would be good to know which, one in the past did not return the signatures in a raw format so the verification failed.


Cheers,
Franco