Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
pppoe password
« previous
next »
Print
Pages: [
1
]
Author
Topic: pppoe password (Read 4795 times)
jtk174
Newbie
Posts: 3
Karma: 1
pppoe password
«
on:
March 29, 2018, 09:49:18 pm »
Just been running opnsense 18.1.4-amd64 for a few weeks, so this is pretty new to me.
Had been having some speed issues ( not opnsense related ) and had gone to the BT wholesale speedchecker @
http://www.speedtest.btwholesale.com/
As some issues were identified, it requested that if I wanted to do further testing, I would have to change my connection point temporarily, in order to run the tests.
However, when I went to change my pppoe settings, opnsense insists on a password being entered. As no password is required for the BT connection I could not proceed.
Anything I can do ?
Logged
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: pppoe password
«
Reply #1 on:
March 29, 2018, 10:35:48 pm »
You could open a ticket here to get rid of the mandatory password check for PPPoE links:
https://github.com/opnsense/core/issues
It's the first time I ever heard of a passwordless PPPoE link. This setup might not be that popular and so the bug (or missing feature) might not get a high priority. But the devs will know better :-)
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
jtk174
Newbie
Posts: 3
Karma: 1
Re: pppoe password
«
Reply #2 on:
March 30, 2018, 12:22:10 pm »
Many thanks for your reply.
I will give it a go
Logged
marjohn56
Hero Member
Posts: 1689
Karma: 179
Re: pppoe password
«
Reply #3 on:
March 30, 2018, 01:10:35 pm »
@elektroinside - You do need a username/password to connect to the BTOR network, these used to be
Username: bthomehub@btbroadband.com
Password: <blank or anything>
VLAN: 101
VPI: 1
@jtk174 - Can you post of screen grab of that page from the BTOR website, I think it may be referring to using the test socket.
Logged
OPNsense 24.7
-
Qotom Q355G4
- ISP -
Squirrel 1Gbps
.
Team Rebellion Member
- If we've helped you remember to applaud
elektroinside
Hero Member
Posts: 574
Karma: 51
Re: pppoe password
«
Reply #4 on:
March 30, 2018, 05:05:15 pm »
Oh, ok. Maybe he could try with any password, just to confirm it works
«
Last Edit: March 30, 2018, 06:35:20 pm by elektroinside
»
Logged
OPNsense v18
| HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s
Team Rebellion Member
jtk174
Newbie
Posts: 3
Karma: 1
Re: pppoe password
«
Reply #5 on:
March 31, 2018, 03:26:12 pm »
I will try to attach a screenshot of the page that caused me the problem. However, I contacted BT first and they said to try either bt or BT. I tried bt first and that appeared to connect, giving me an address on the wan interface in the 172.20 range. The test would still not run, after I unticked the relevant box in wan interface settings.
Around the same time I was contemplating trying mobile broadband and this is now what I intend to do.
My BT down was 18Mb and 1Mb in the up.
My tests with the mobile broadband were 69Mb Down and 21Mb Up. As a result, I have decided not to waste any more time and get the mobile broadband setup. I'm still under contract with BT for about 6 weeks, so perhaps I can try a multi wan config. On the other hand I might just go and clear the crap out of my garage
Thanks for the replies folks. Its good to see an active community here.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
pppoe password