OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 18.1 Legacy Series »
  • IPsec connected but no traffic
« previous next »
  • Print
Pages: [1]

Author Topic: IPsec connected but no traffic  (Read 2439 times)

maxxer

  • Newbie
  • *
  • Posts: 28
  • Karma: 0
    • View Profile
IPsec connected but no traffic
« on: February 06, 2018, 09:51:24 am »
Hi. I'm new to OPNsense, I'm replacing an existing pfSense installation.

I replicated all the configurations and everything seems ok, I'm struggling a bit with VPNs.
Right  now I'm trying to restore IPSect tunnels. Everything seems ok (from the status page), but I cannot reach the remote network. In Firewall > IPsec I've enabled all the traffic, just for testing.

From the status page the P2 is INSTALLED and Routed, but still I cannot ping any host of the remote endpoint, neither from the lan or from the firewall itself.

Any hint?
thanks
Logged
YetOpen S.r.l.

elektroinside

  • Hero Member
  • *****
  • Posts: 574
  • Karma: 51
    • View Profile
Re: IPsec connected but no traffic
« Reply #1 on: February 06, 2018, 10:42:27 am »
Hi and welcome to OPNsense!

There's some useful info here: https://docs.opnsense.org/manual/how-tos/ipsec-s2s.html
Maybe you'll find something there?
Logged
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member

maxxer

  • Newbie
  • *
  • Posts: 28
  • Karma: 0
    • View Profile
Re: IPsec connected but no traffic
« Reply #2 on: February 06, 2018, 11:34:31 am »
Quote from: elektroinside on February 06, 2018, 10:42:27 am
There's some useful info here: https://docs.opnsense.org/manual/how-tos/ipsec-s2s.html
Maybe you'll find something there?
thanks. I had seen that link, but I checked and I have done what it says. In fact the tunnel seems established!

Looks like a problem with the routes...
Logged
YetOpen S.r.l.

maxxer

  • Newbie
  • *
  • Posts: 28
  • Karma: 0
    • View Profile
Re: IPsec connected but no traffic
« Reply #3 on: February 06, 2018, 06:15:49 pm »
Is it normal that the IPsec remote network is routed through the WAN gateway? This is what is shown in System > Routes > Status!
Logged
YetOpen S.r.l.

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 18.1 Legacy Series »
  • IPsec connected but no traffic
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2