OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 16.7 Legacy Series »
  • MULTI-WAN dest adresses in FW,NAT (double entries needed?)
« previous next »
  • Print
Pages: [1]

Author Topic: MULTI-WAN dest adresses in FW,NAT (double entries needed?)  (Read 2315 times)

maweber

  • Newbie
  • *
  • Posts: 19
  • Karma: 0
    • View Profile
MULTI-WAN dest adresses in FW,NAT (double entries needed?)
« on: January 23, 2017, 09:33:17 pm »
Hi all
I noticed it is needed to also define WAN interface-addresses, if there should be NAT traffic from WAN into DMZ for example. (I didn't know it would affect WAN OUT directions too if I only put the WAN interface, without the WAN-dest-address).

My situation is that I have a WAN pool with 2 GWs.
But when trying to setup NAT for both GW i therefore need to DOUBLE every entry in FW/NAT (each with the intf-address of the corresponding WAN port).

Is there a way to substitute all WAN interface-addresses?
Would "this Firewall" be a safe choice? I'm not sure of this term.

Thank you
Best
Manu
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 16.7 Legacy Series »
  • MULTI-WAN dest adresses in FW,NAT (double entries needed?)
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2