Cannot upgrade to 18.7 from 18.1.13

[hgood]

I tried to upgrade from 18.1.13 to 18.7 but failed with the error message "write failed". See attached screenshots for more details.
Thank you for helping.

[franco]

Looks like your disk is full?


Cheers,
Franco

[hgood]

Indeed the disk was full after this has happened. OPNSense showed up with a disk usage of 108%. To resolve this situation I cleanup up the download cache and emptied the log files.
Attached is a screen shot with the system information after cleaning up, but it still happens. According to this there should be ~700MB disk space available. Is this not enough?

Thank you for helping.
Hubert

[bobbis]

Code: [Select]

*** xxxxxxxxx.xxxxxxxxxxx: OPNsense 18.1.13_1 (amd64/OpenSSL) ***

 LAN (em0)       -> v4: XXXXXXXXXX
 WAN (re0)       -> v4: XXXXXXXXXX

  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Upgrade from console
  6) Reboot system                      13) Restore a backup

Enter an option: 12

Fetching change log information, please wait... done

This will automatically fetch all available updates, apply them,
and reboot if necessary.

A major firmware upgrade is available for this installation: 18.7

Make sure you have read the release notes and migration guide before
attempting this upgrade.  Around 400MB will need to be downloaded and
require 800MB of free space.  Continue with this major upgrade by
typing the major upgrade version number displayed above.

Minor updates may be available, answer 'y' to run them instead.

Proceed with this action? [18.7/y/N]: y

Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Checking for upgrades (34 candidates): .......... done
Processing candidates (34 candidates): . done
Checking integrity... done (0 conflicting)
Your packages are up to date.
Checking integrity... done (0 conflicting)
Nothing to do.
Nothing to do.
Starting web GUI...done.
Generating RRD graphs...done.

*** xxxxxxxxx.xxxxxxxxxxx: OPNsense 18.1.13_1 (amd64/OpenSSL) ***

 LAN (em0)       -> v4: XXXXXXXXXX
 WAN (re0)       -> v4: XXXXXXXXXX

  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Upgrade from console
  6) Reboot system                      13) Restore a backup

Enter an option:

Code: [Select]

df -hm
Filesystem             1M-blocks Used Avail Capacity  Mounted on
/dev/ufs/OPNsense_Nano      3813 1793  1714    51%    /
devfs                          0    0     0   100%    /dev
tmpfs                       1598    8  1590     1%    /var
tmpfs                       1590    0  1590     0%    /tmp
devfs                          0    0     0   100%    /var/dhcpd/dev