Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
Cannot start snmpd service
« previous
next »
Print
Pages: [
1
]
Author
Topic: Cannot start snmpd service (Read 15911 times)
eptesicus
Newbie
Posts: 20
Karma: 1
Cannot start snmpd service
«
on:
July 19, 2018, 06:28:43 pm »
I installed the os-net-snmp plugin, but the service is unable to run. I've attempted to reinstall without resolution. I'm running 18.1.12 and have os-net-snmp 1.0_1 installed.
Jul 19 12:21:18 root: /usr/local/etc/rc.d/snmpd: WARNING: failed to start snmpd
Thoughts on getting snmp running?
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Cannot start snmpd service
«
Reply #1 on:
July 19, 2018, 06:49:28 pm »
Correct IPs for listening?
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
eptesicus
Newbie
Posts: 20
Karma: 1
Re: Cannot start snmpd service
«
Reply #2 on:
July 19, 2018, 07:40:49 pm »
I've entered 10.0.0.30 which is the workstation that I'm trying to test snmpwalk at the moment, and I've also tried other IPs, as well as 10.0.0.0/20 to allow all local traffic. The service still fails to start.
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Cannot start snmpd service
«
Reply #3 on:
July 19, 2018, 07:50:10 pm »
You have to enter the IP of the Firewall, like LAN IP
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
eptesicus
Newbie
Posts: 20
Karma: 1
Re: Cannot start snmpd service
«
Reply #4 on:
July 19, 2018, 08:08:23 pm »
The service continues to fail to start with the LAN (10.0.0.1) IP set as the Listen IPs.
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Cannot start snmpd service
«
Reply #5 on:
July 19, 2018, 09:12:12 pm »
Can you try service snmpd start via console?
Do you have old bsnmpd Plugin installed?
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
eptesicus
Newbie
Posts: 20
Karma: 1
Re: Cannot start snmpd service
«
Reply #6 on:
July 20, 2018, 01:35:48 pm »
I've tried starting the service via console, and get the same error. I had bsnmpd installed previously (not any longer), but I was never able to get that to work, even though I was able to get that service to start.
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Cannot start snmpd service
«
Reply #7 on:
July 20, 2018, 05:18:40 pm »
system.log doesnt say anything?
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
eptesicus
Newbie
Posts: 20
Karma: 1
Re: Cannot start snmpd service
«
Reply #8 on:
July 21, 2018, 05:15:28 pm »
No. I reinstalled os-snmp, and the service starts up fine, but no matter what I do, I'm unable to get anything on my network to poll SNMP from the firewall.
Logged
optimus_prime
Newbie
Posts: 2
Karma: 1
Re: Cannot start snmpd service
«
Reply #9 on:
August 05, 2018, 02:36:47 am »
I'm having the same issue after moving to net-snmp. My log has an error:
root: /usr/local/etc/rc.d/snmpd: WARNING: failed to start snmpd
after putting in any value other than 127.0.0.1. the old snmp plugin worked fine with my current monitoring setup. have no idea why its not working?
Logged
mimugmail
Hero Member
Posts: 6767
Karma: 494
Re: Cannot start snmpd service
«
Reply #10 on:
August 05, 2018, 08:11:00 am »
You have to set valid IP addresses. Flush old config and remove plugin (stopping the service and then remove).
Normally there shouldn't be a problem.
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
Taomyn
Sr. Member
Posts: 444
Karma: 20
Re: Cannot start snmpd service
«
Reply #11 on:
December 13, 2018, 02:31:59 pm »
I wanted to add my own experience moving from the old snmp plug-in to the new one (firewall running v18.7.9) - basically, reboot after uninstalling the old one. No matter what I did the firewall remained holding old connections to the configured IP and port. Rebooted and all was well.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
Cannot start snmpd service