Author Topic: Default Deny Rule TCP port domain controller (Read 3858 times)

Germano · « **on:** July 12, 2018, 01:07:36 pm »

Hello,

I do not understand the Default deny rule are not displayed in the interface.
through vlans I communicate with my domain but it blocks me TCP port 389,135,139,445.

yet I have a rule in LAN that allows communication LAN 10.10.10.0 LAN to an alias VLAN 10.10.30.0 ANY

all other ports are allow except those there.
I have to do what? it's still internal.

mimugmail · « **Reply #1 on:** July 12, 2018, 01:38:05 pm »

Do you have a screenshot of your LAN ruleset?

franco · « **Reply #2 on:** July 12, 2018, 01:53:04 pm »

Sounds like asymmetric traffic hitting your LAN port. You can disable state tracking in the IPv4 pass rule of your LAN.

Cheers,
Franco

Germano · « **Reply #3 on:** July 12, 2018, 04:11:35 pm »

Thanks, it was good now

I will not have found.

Firewall>LAN rules> IPV4 default rule edit advanced option below.
Value STATE TYPE> NONE apply

Author Topic: Default Deny Rule TCP port domain controller (Read 3858 times)

Germano

Default Deny Rule TCP port domain controller

mimugmail

Re: Default Deny Rule TCP port domain controller

franco

Re: Default Deny Rule TCP port domain controller

Germano

Re: Default Deny Rule TCP port domain controller