Unable to install from serial image on APU2

[marjohn56]

What are you using to write the USB?

I've never seen the dreaded error 19.... ever.

[hilfubsi]

OK, well you can install from a USB stick as I and thousands of others have done so. As I use APU2's for testing I must have done it on countless occasions, at least three times last weekend. :)

Here's my usage.

Where did you find your dark theme?

[franco]

It's currently under development by marjohn56 himself. You can install from the command line:

# pkg install os-theme-rebellion

Then go to System: Settings: General and select the theme.


Cheers,
Franco

[hilfubsi]

What are you using to write the USB?

I've never seen the dreaded error 19.... ever.

I used Etcher on Linux with the 18.1-serial image.

The error 19 is about GPT/MBR. I don't quite understand what the problem is, but the drive I was installing to had a dos partition table and I chose GPT/UEFI in the installer (since it's the recommended option). Then I deleted all the partitions on the SSD, switched to GPT partition scheme, and selected GPT/UEFI again in the installer. That's what I'm running now. I'm afraid to reboot the router :D

[marjohn56]

Job done...  that's the easy part done anyway. :)