Route all traffic through IPsec VPN

[lambrusco]

Hi all, I followed the How to guide for configuring an IPsec Road-Warrior VPN to connect my home network from outside and I'm now able to access my local network.

What I would like to do now is having the possibility to route all the internet traffic from my laptop trough my home connection.

I created the following firewall rules


And when I try to navigate I see in the logs that the rule is triggered


Despite the firewall rules working I cannot connect outside the LAN.

Those are the automatic generates NAT rules:


Does anyone has a suggestion on where it could be the issue?

Thanks!

[bartjsmit]

Does OPNsense hold your public IP on the WAN interface? If you use a private IP on the WAN side, you'll need to put a static route on your next (ISP) router for the tunnel network and any networks on the far side.

Bart...

[lambrusco]

Hi Bart,
thanks for the answer.

WAN interface has a local IP on a private network 192.168.100.0/24 but gets the public IP via PPPoE

here are my automatic routes (The obscured one is the public IP):

[lambrusco]

Does anyone can help?
Thanks!