OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • [SOLVED] incorrect display browser
« previous next »
  • Print
Pages: [1] 2

Author Topic: [SOLVED] incorrect display browser  (Read 20029 times)

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
[SOLVED] incorrect display browser
« on: August 25, 2017, 01:40:37 pm »
Hello!

I got problems with web-gui.

Astra Linux:


Debian 9:




how can I fix it?
« Last Edit: August 28, 2017, 05:08:57 pm by franco »
Logged
www.itsecforu.ru

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 17656
  • Karma: 1610
    • View Profile
Re: incorrect display browser
« Reply #1 on: August 25, 2017, 03:23:20 pm »
Hi there,

Does your client not have internet access? It's a problem that sporadically appears in test installations. Since both browsers do the same thing it seems likely.

Or the media you installed from was corrupted prior to install so the installer copies the corrupted disk and essential files may be missing.


Cheers,
Franco
Logged

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #2 on: August 25, 2017, 04:48:28 pm »
Quote
Does your client not have internet access?

nope. Will it fix it mb?
Logged
www.itsecforu.ru

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 17656
  • Karma: 1610
    • View Profile
Re: incorrect display browser
« Reply #3 on: August 25, 2017, 06:33:25 pm »
It will for sure. But can help pin this down by opening up the developer console in i.e. firefox and show us the error message(s)? We've never been able to reproduce this and fixing this would be better than not. :)


Thank you,
Franco
Logged

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #4 on: August 28, 2017, 09:41:39 am »



part of source code:

« Last Edit: August 28, 2017, 10:33:14 am by cryptoparty »
Logged
www.itsecforu.ru

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #5 on: August 28, 2017, 10:10:23 am »
I tryed to open web-console by Opera browser.

It seems same:




Code: [Select]
diag_logs.php:18 Resource interpreted as Stylesheet but transferred with MIME type text/html: "https://192.168.4.90/index.php".
diag_logs.php:54 Resource interpreted as Stylesheet but transferred with MIME type text/html: "https://192.168.4.90/index.php".
diag_logs.php:65 Resource interpreted as Stylesheet but transferred with MIME type text/html: "https://192.168.4.90/index.php".
diag_logs.php:68 Resource interpreted as Stylesheet but transferred with MIME type text/html: "https://192.168.4.90/index.php".
diag_logs.php:60 Resource interpreted as Stylesheet but transferred with MIME type text/html: "https://192.168.4.90/index.php".
diag_logs.php:57 Resource interpreted as Stylesheet but transferred with MIME type text/html: "https://192.168.4.90/index.php".
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
diag_logs.php:98 Uncaught ReferenceError: $ is not defined
    at diag_logs.php:98
(anonymous) @ diag_logs.php:98
diag_logs.php:212 Uncaught ReferenceError: $ is not defined
    at diag_logs.php:212
(anonymous) @ diag_logs.php:212
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
index.php:1 Uncaught SyntaxError: Unexpected token <
diag_logs.php:1190 Uncaught ReferenceError: $ is not defined
    at diag_logs.php:1190
(anonymous) @ diag_logs.php:1190
« Last Edit: August 28, 2017, 10:51:08 am by cryptoparty »
Logged
www.itsecforu.ru

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #6 on: August 28, 2017, 11:33:37 am »
tryed open by windows - saw log file /crash_reporter.php:
Code: [Select]


A short problem description or steps to reproduce.

Please double-check the following contents to ensure you are comfortable submitting the following information.

System Information:
User-Agent Mozilla/5.0 (Windows NT 6.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/60.0.3112.101 Safari/537.36
FreeBSD 11.0-RELEASE-p11 #0 3c5efa92f(stable/17.7): Mon Jul 24 07:30:40 CEST 2017     root@sensey64:/usr/obj/usr/src/sys/SMP
OPNsense 17.7-7c9539338 OpenSSL 1.0.2l  25 May 2017 (amd64)
Time Mon, 28 Aug 2017 09:27:55 +0000
PHP Errors:

[28-Aug-2017 08:07:48 Etc/UTC] PHP Warning:  require_once(widgets/include/interfaces.inc): failed to open stream: No such file or directory in /usr/local/www/widgets/widgets/interface_list.widget.php on line 33
[28-Aug-2017 08:07:48 Etc/UTC] PHP Fatal error:  require_once(): Failed opening required 'widgets/include/interfaces.inc' (include_path='.:/usr/local/etc/inc:/usr/local/www:/usr/local/opnsense/mvc:/usr/local/share/pear:/usr/local/opnsense/contrib') in /usr/local/www/widgets/widgets/interface_list.widget.php on line 33
[28-Aug-2017 08:08:55 Etc/UTC] PHP Warning:  require_once(widgets/include/interfaces.inc): failed to open stream: No such file or directory in /usr/local/www/widgets/widgets/interface_list.widget.php on line 33

(include_path='.:/usr/local/etc/inc:/usr/local/www:/usr/local/opnsense/mvc:/usr/local/share/pear:/usr/local/opnsense/contrib') in /usr/local/www/widgets/widgets/interface_list.widget.php on line 33
dmesg.boot:
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p11 #0 3c5efa92f(stable/17.7): Mon Jul 24 07:30:40 CEST 2017
    root@sensey64:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): text 80x25
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-out
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD HARDENING] procfs hardening: enabled
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: Intel(R) Xeon(R) CPU E5-4640 v2 @ 2.20GHz (2200.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xfa3fbff
  Features2=0x9e982203
  AMD Features=0x28100800
  AMD Features2=0x1
  TSC: P-state invariant
Hypervisor: Origin = "VMwareVMware"
real memory  = 402653184 (384 MB)
avail memory = 342523904 (326 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
random: unblocking device.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0  irqs 0-23 on motherboard
random: entropy device external interface
wlan: mac acl policy registered
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81149b90, 0) error 19
kbd1 at kbdmux0
vtvga0:  on motherboard
cryptosoft0:  on motherboard
acpi0:  on motherboard
acpi0: Power Button (fixed)
hpet0:  iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
cpu0:  numa-domain 0 on acpi0
attimer0:  port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0:  port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0:  port 0xcf8-0xcff on acpi0
pci0:  on pcib0
pcib1:  at device 1.0 on pci0
pci1:  on pcib1
isab0:  at device 7.0 on pci0
isa0:  on isab0
atapci0:  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1060-0x106f at device 7.1 on pci0
ata0:  at channel 0 on atapci0
ata1:  at channel 1 on atapci0
pci0:  at device 7.3 (no driver attached)
vgapci0:  port 0x1070-0x107f mem 0xec000000-0xefffffff,0xfe000000-0xfe7fffff irq 16 at device 15.0 on pci0
vgapci0: Boot video device
mpt0:  port 0x1400-0x14ff mem 0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 17 at device 16.0 on pci0
mpt0: MPI Version=1.2.0.0
pcib2:  at device 17.0 on pci0
pci2:  on pcib2
em0:  port 0x2000-0x203f mem 0xfd5c0000-0xfd5dffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2
em0: Ethernet address: 00:50:56:9d:bb:f5
em0: netmap queues/slots: TX 1/256, RX 1/256
em1:  port 0x2040-0x207f mem 0xfd5a0000-0xfd5bffff,0xfdfe0000-0xfdfeffff irq 19 at device 1.0 on pci2
em1: Ethernet address: 00:50:56:9d:9d:37
em1: netmap queues/slots: TX 1/256, RX 1/256
pcib3:  at device 21.0 on pci0
pcib3: [GIANT-LOCKED]
pcib4:  at device 21.1 on pci0
pcib4: [GIANT-LOCKED]
pcib5:  at device 21.2 on pci0
pcib5: [GIANT-LOCKED]
pcib6:  at device 21.3 on pci0
pcib6: [GIANT-LOCKED]
pcib7:  at device 21.4 on pci0
pcib7: [GIANT-LOCKED]
pcib8:  at device 21.5 on pci0
pcib8: [GIANT-LOCKED]
pcib9:  at device 21.6 on pci0
pcib9: [GIANT-LOCKED]
pcib10:  at device 21.7 on pci0
pcib10: [GIANT-LOCKED]
pcib11:  at device 22.0 on pci0
pcib11: [GIANT-LOCKED]
pcib12:  at device 22.1 on pci0
pcib12: [GIANT-LOCKED]
pcib13:  at device 22.2 on pci0
pcib13: [GIANT-LOCKED]
pcib14:  at device 22.3 on pci0
pcib14: [GIANT-LOCKED]
pcib15:  at device 22.4 on pci0
pcib15: [GIANT-LOCKED]
pcib16:  at device 22.5 on pci0
pcib16: [GIANT-LOCKED]
pcib17:  at device 22.6 on pci0
pcib17: [GIANT-LOCKED]
pcib18:  at device 22.7 on pci0
pcib18: [GIANT-LOCKED]
pcib19:  at device 23.0 on pci0
pcib19: [GIANT-LOCKED]
pcib20:  at device 23.1 on pci0
pcib20: [GIANT-LOCKED]
pcib21:  at device 23.2 on pci0
pcib21: [GIANT-LOCKED]
pcib22:  at device 23.3 on pci0
pcib22: [GIANT-LOCKED]
pcib23:  at device 23.4 on pci0
pcib23: [GIANT-LOCKED]
pcib24:  at device 23.5 on pci0
pcib24: [GIANT-LOCKED]
pcib25:  at device 23.6 on pci0
pcib25: [GIANT-LOCKED]
pcib26:  at device 23.7 on pci0
pcib26: [GIANT-LOCKED]
pcib27:  at device 24.0 on pci0
pcib27: [GIANT-LOCKED]
pcib28:  at device 24.1 on pci0
pcib28: [GIANT-LOCKED]
pcib29:  at device 24.2 on pci0
pcib29: [GIANT-LOCKED]
pcib30:  at device 24.3 on pci0
pcib30: [GIANT-LOCKED]
pcib31:  at device 24.4 on pci0
pcib31: [GIANT-LOCKED]
pcib32:  at device 24.5 on pci0
pcib32: [GIANT-LOCKED]
pcib33:  at device 24.6 on pci0
pcib33: [GIANT-LOCKED]
pcib34:  at device 24.7 on pci0
pcib34: [GIANT-LOCKED]
acpi_acad0:  on acpi0
atkbdc0:  port 0x60,0x64 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0:  irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0:  port 0x378-0x37b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0:  on ppc0
lpt0:  on ppbus0
lpt0: Interrupt-driven port
ppi0:  on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
fdc0:  port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0:  at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcbfff,0xdc000-0xdffff,0xe0000-0xe7fff on isa0
vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
nvme cam probe device init
em0: link state changed to UP
em1: link state changed to UP
(da0:mpt0:0:0:0): UNMAPPED
da0 at mpt0 bus 0 scbus2 target 0 lun 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
Timecounter "TSC-low" frequency 1100000000 Hz quality 1000
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
da0:  Fixed Direct Access SCSI-2 device
Trying to mount root from cd9660:/dev/iso9660/OPNSENSE_INSTALL [ro]...
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 8192MB (16777216 512 byte sectors)
da0: quirks=0x40
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0:  Removable CD-ROM SCSI device
cd0: Serial Number 10000000000000000001
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 826MB (422974 2048 byte sectors)
cd0: quirks=0x40
aesni0:  on motherboard
pflog0: promiscuous mode enabled
arp: 00:50:56:9d:2c:7a is using my IP address 192.168.1.1 on em0!
arp: 00:50:56:9d:2c:7a is using my IP address 192.168.1.1 on em0!
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
All buffers synced.
Uptime: 28m57s
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p11 #0 3c5efa92f(stable/17.7): Mon Jul 24 07:30:40 CEST 2017
    root@sensey64:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): text 80x25
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-out
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD HARDENING] procfs hardening: enabled
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: Intel(R) Xeon(R) CPU E5-4640 v2 @ 2.20GHz (2200.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xfa3fbff
  Features2=0x9e982203
  AMD Features=0x28100800
  AMD Features2=0x1
  TSC: P-state invariant
Hypervisor: Origin = "VMwareVMware"
real memory  = 402653184 (384 MB)
avail memory = 342523904 (326 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
random: unblocking device.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0  irqs 0-23 on motherboard
random: entropy device external interface
wlan: mac acl policy registered
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81149b90, 0) error 19
kbd1 at kbdmux0
vtvga0:  on motherboard
cryptosoft0:  on motherboard
acpi0:  on motherboard
acpi0: Power Button (fixed)
hpet0:  iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
cpu0:  numa-domain 0 on acpi0
attimer0:  port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0:  port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0:  port 0xcf8-0xcff on acpi0
pci0:  on pcib0
pcib1:  at device 1.0 on pci0
pci1:  on pcib1
isab0:  at device 7.0 on pci0
isa0:  on isab0
atapci0:  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1060-0x106f at device 7.1 on pci0
ata0:  at channel 0 on atapci0
ata1:  at channel 1 on atapci0
pci0:  at device 7.3 (no driver attached)
vgapci0:  port 0x1070-0x107f mem 0xec000000-0xefffffff,0xfe000000-0xfe7fffff irq 16 at device 15.0 on pci0
vgapci0: Boot video device
mpt0:  port 0x1400-0x14ff mem 0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 17 at device 16.0 on pci0
mpt0: MPI Version=1.2.0.0
pcib2:  at device 17.0 on pci0
pci2:  on pcib2
em0:  port 0x2000-0x203f mem 0xfd5c0000-0xfd5dffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2
em0: Ethernet address: 00:50:56:9d:bb:f5
em0: netmap queues/slots: TX 1/256, RX 1/256
em1:  port 0x2040-0x207f mem 0xfd5a0000-0xfd5bffff,0xfdfe0000-0xfdfeffff irq 19 at device 1.0 on pci2
em1: Ethernet address: 00:50:56:9d:9d:37
em1: netmap queues/slots: TX 1/256, RX 1/256
pcib3:  at device 21.0 on pci0
pcib3: [GIANT-LOCKED]
pcib4:  at device 21.1 on pci0
pcib4: [GIANT-LOCKED]
pcib5:  at device 21.2 on pci0
pcib5: [GIANT-LOCKED]
pcib6:  at device 21.3 on pci0
pcib6: [GIANT-LOCKED]
pcib7:  at device 21.4 on pci0
pcib7: [GIANT-LOCKED]
pcib8:  at device 21.5 on pci0
pcib8: [GIANT-LOCKED]
pcib9:  at device 21.6 on pci0
pcib9: [GIANT-LOCKED]
pcib10:  at device 21.7 on pci0
pcib10: [GIANT-LOCKED]
pcib11:  at device 22.0 on pci0
pcib11: [GIANT-LOCKED]
pcib12:  at device 22.1 on pci0
pcib12: [GIANT-LOCKED]
pcib13:  at device 22.2 on pci0
pcib13: [GIANT-LOCKED]
pcib14:  at device 22.3 on pci0
pcib14: [GIANT-LOCKED]
pcib15:  at device 22.4 on pci0
pcib15: [GIANT-LOCKED]
pcib16:  at device 22.5 on pci0
pcib16: [GIANT-LOCKED]
pcib17:  at device 22.6 on pci0
pcib17: [GIANT-LOCKED]
pcib18:  at device 22.7 on pci0
pcib18: [GIANT-LOCKED]
pcib19:  at device 23.0 on pci0
pcib19: [GIANT-LOCKED]
pcib20:  at device 23.1 on pci0
pcib20: [GIANT-LOCKED]
pcib21:  at device 23.2 on pci0
pcib21: [GIANT-LOCKED]
pcib22:  at device 23.3 on pci0
pcib22: [GIANT-LOCKED]
pcib23:  at device 23.4 on pci0
pcib23: [GIANT-LOCKED]
pcib24:  at device 23.5 on pci0
pcib24: [GIANT-LOCKED]
pcib25:  at device 23.6 on pci0
pcib25: [GIANT-LOCKED]
pcib26:  at device 23.7 on pci0
pcib26: [GIANT-LOCKED]
pcib27:  at device 24.0 on pci0
pcib27: [GIANT-LOCKED]
pcib28:  at device 24.1 on pci0
pcib28: [GIANT-LOCKED]
pcib29:  at device 24.2 on pci0
pcib29: [GIANT-LOCKED]
pcib30:  at device 24.3 on pci0
pcib30: [GIANT-LOCKED]
pcib31:  at device 24.4 on pci0
pcib31: [GIANT-LOCKED]
pcib32:  at device 24.5 on pci0
pcib32: [GIANT-LOCKED]
pcib33:  at device 24.6 on pci0
pcib33: [GIANT-LOCKED]
pcib34:  at device 24.7 on pci0
pcib34: [GIANT-LOCKED]
acpi_acad0:  on acpi0
atkbdc0:  port 0x60,0x64 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0:  irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0:  port 0x378-0x37b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0:  on ppc0
lpt0:  on ppbus0
lpt0: Interrupt-driven port
ppi0:  on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
fdc0:  port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0:  at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcbfff,0xdc000-0xdffff,0xe0000-0xe7fff on isa0
vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
nvme cam probe device init
em0: link state changed to UP
em1: link state changed to UP
(da0:mpt0:0:0:0): UNMAPPED
da0 at mpt0 bus 0 scbus2 target 0 lun 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
Timecounter "TSC-low" frequency 1100000000 Hz quality 1000
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
da0:  Fixed Direct Access SCSI-2 device
Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]...
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 8192MB (16777216 512 byte sectors)
da0: quirks=0x40
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0:  Removable CD-ROM SCSI device
cd0: Serial Number 10000000000000000001
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 826MB (422974 2048 byte sectors)
cd0: quirks=0x40
Logged
www.itsecforu.ru

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 17656
  • Karma: 1610
    • View Profile
Re: incorrect display browser
« Reply #7 on: August 28, 2017, 11:40:17 am »
It looks like a broken install.

Can you run the following on the OPNsense to confirm?

# pkg check -sa


Cheers,
Franco
Logged

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #8 on: August 28, 2017, 12:00:33 pm »
a lot missing files as this one:

Logged
www.itsecforu.ru

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #9 on: August 28, 2017, 01:13:25 pm »
Should I reinstall php pakages?
Logged
www.itsecforu.ru

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 17656
  • Karma: 1610
    • View Profile
Re: incorrect display browser
« Reply #10 on: August 28, 2017, 01:26:35 pm »
Either the install went wrong or the file system is faulty.

You need to try to reinstall all packages and the operating system to try to fix this:

# opnsense-update -f

No data will be lost, but it could take a while and you need Internet access.

Or you could reinstall cleanly and verify your installation with "pkg check -sa" just to be sure.


Cheers,
Franco
Logged

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #11 on: August 28, 2017, 01:40:21 pm »
May I make it locally?

   I mean to add a repository through USB or from other machine which has an Internet connection on the local area network
Logged
www.itsecforu.ru

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 17656
  • Karma: 1610
    • View Profile
Re: incorrect display browser
« Reply #12 on: August 28, 2017, 01:45:07 pm »
Sure, assuming 17.7 amd64/OpenSSL get these files:

https://pkg.opnsense.org/FreeBSD:11:amd64/17.7/sets/base-17.7-amd64.obsolete
https://pkg.opnsense.org/FreeBSD:11:amd64/17.7/sets/base-17.7-amd64.txz
https://pkg.opnsense.org/FreeBSD:11:amd64/17.7/sets/kernel-17.7-amd64.txz
https://pkg.opnsense.org/FreeBSD:11:amd64/17.7/sets/packages-17.7-OpenSSL-amd64.tar

Copy them to /root on the box. Then run:

# opnsense-update -if -l /root

(this is with a lower-case "L")

And reboot.


Cheers,
Franco
Logged

cryptoparty

  • Newbie
  • *
  • Posts: 37
  • Karma: 0
    • View Profile
    • information security for u
Re: incorrect display browser
« Reply #13 on: August 28, 2017, 02:35:55 pm »
Damn :( Tell me plz, how can I enable ssh or sftp or ftp?
« Last Edit: August 28, 2017, 02:41:56 pm by cryptoparty »
Logged
www.itsecforu.ru

jwe

  • Newbie
  • *
  • Posts: 30
  • Karma: 4
    • View Profile
Re: incorrect display browser
« Reply #14 on: August 28, 2017, 02:58:29 pm »
Quote from: cryptoparty on August 28, 2017, 02:35:55 pm
Damn :( Tell me plz, how can I enable ssh or sftp or ftp?

If it is working in your webinterface, you can try to enable ssh
under system=>Settings=>Administrator or under the following url:
https://[pfopnsense-ip]/system_advanced_admin.php

« Last Edit: August 28, 2017, 03:02:40 pm by jwe »
Logged
  • Print
Pages: [1] 2
« previous next »
  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • [SOLVED] incorrect display browser
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2024 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy     | XHTML | RSS | WAP2