multi wan not browsing

[the_wolf]

follow the manual below: ... https://docs.opnsense.org/manual/how-tos/multiwan.html is to only turn on and to navigation. Already redid the settings 3 times. Not vavega nothing. Neither the captive portal. For everything. But I can ping the fixed IP. So the problem this in the dns. Someone's a light ??

[the_wolf]

...

[the_wolf]

...

[the_wolf]

...

[Julien]

i have been working on this for over a year to get it working.
what is your Trigger Level Explained ?

[the_wolf]

sorry I did not understand.

[Julien]

Can you show your routing info?
who is doing the dns? the firewall or some internal dns server ?

[franco]

It looks like a DNS issue, how are your severs set up under System: Settings: General ?

[the_wolf]

Sorry for the delay

The routes are these.

Opn is doing dns

[the_wolf]

Sorry for the delay

I put a valid dns and are browsing the other vlans. But in vlan with captive portal does not ask user and password.

[the_wolf]

I'm not using proxy.

using version 17.7

[the_wolf]

I did everything again but this time I just cleared the default route in the gateway settings and the route rules left everything default. Now it's working. But I could not test if failover is working. Will it work ??

[Julien]

Its should works
I know it was a routinge issue as I've faced the same issue couple of days ago
If you follow the documentations you should get things working

[the_wolf]

thank you. I'll try and notice .

[jon.alf]

using dnsmasq dns instead of unbound works for me.