Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
1u Home Build
« previous
next »
Print
Pages: [
1
]
Author
Topic: 1u Home Build (Read 7475 times)
Exactly
Newbie
Posts: 2
Karma: 0
1u Home Build
«
on:
June 16, 2017, 04:19:42 pm »
Hello all,
Recently found OPNsense and love the concept.
I'm looking to make my own 1u build, has anyone else give this a try?
This is what I am looking at, advice/suggestions/critique all welcome
(yes this may be over the top, but consider it a bit of fun/hobby)
Chassis:
https://www.supermicro.com/products/chassis/1U/512/SC512F-441B
Mobo:
https://www.supermicro.com/products/motherboard/Xeon/C236_C232/X11SSM-F.cfm
CPU:
https://ark.intel.com/products/88179/Intel-Pentium-Processor-G4400-3M-Cache-3_30-GHz
(Socket: 1151, supports AES)
RAM: 4GB (Mobo is DDR4, so 1 stick of 4GB low profile)
SSD: 850 EVO
As I say, anyone got any suggestions to this build, or advice, it'll be greatly appreciated.
(this isn't to avoid buying a ready built firewall from one of the recommended vendors, I just enjoy building PCs etc. - once I am up and running, I will be making a donation to this project)
Thank you
Logged
weust
Hero Member
Posts: 650
Karma: 57
Re: 1u Home Build
«
Reply #1 on:
June 16, 2017, 06:43:56 pm »
Don't forget the 1U CPU cooler.
And it depends on what you plan to do with it, and your internet speed up/down.
The dual core might not pull IPS/IDS and VPN, etc all at once.
I have a C2758F Supermicro board. 20W TDP, four onboard NICs.
Mine runs as a hypervisor running a two core VM for my 300/30 connection.
Not using IPS/IDS as I would need all 8 cores for that.
Just something to keep in mind.
Logged
Hobbyist at home, sysadmin at work. Sometimes the first is mixed with the second.
Exactly
Newbie
Posts: 2
Karma: 0
Re: 1u Home Build
«
Reply #2 on:
June 16, 2017, 07:09:37 pm »
Thanks for the reply
Of course on the cooler
At the minute it's hypothetical, connection speed will be FTTC, so approx 40-60Mbps down and 15-20Mbps up
Nice setup! I may upgrade the CPU to a i5-6500, or similar, that should do the trick?
Logged
weust
Hero Member
Posts: 650
Karma: 57
Re: 1u Home Build
«
Reply #3 on:
June 16, 2017, 08:10:47 pm »
That still depends on what you want to enable in terms of features.
Logged
Hobbyist at home, sysadmin at work. Sometimes the first is mixed with the second.
bringha
Sr. Member
Posts: 253
Karma: 19
Re: 1u Home Build
«
Reply #4 on:
June 30, 2017, 07:13:56 pm »
Well,
this board is not the optimum wrt power consumption and some of the components are somewhat oversized
Perhaps consider
+Supermicros X11SBA-LN4F-O (Attention: Must be hardware revision 1.02)
+ with 8 G RAM (4 is also sufficient)
+ Supermicro SuperDOM with 16 GB
+ 1 U chassis is SC505-203B
I build already the 5th system with that config and I am very happy with that (since using 1.02
)
Br br
Logged
weust
Hero Member
Posts: 650
Karma: 57
Re: 1u Home Build
«
Reply #5 on:
June 30, 2017, 07:23:09 pm »
But you also don't know what type of features he wants to use.
Logged
Hobbyist at home, sysadmin at work. Sometimes the first is mixed with the second.
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
1u Home Build