How can I switch WAN via PPPoe to DHCP?

Started by BrokenOnion, November 20, 2026, 11:50:55 PM

Previous topic - Next topic
Hi,

I'm considering switching my current broadband to Virgin Media that will allow me to use 1gb broadband connection but I'm struggling to find how to make the configuration change in OPNsense.

Doing my research online, to make it work, I will need to switch the supplied router into modem mode then connect it to my OPNsense box and set it to use DHCP.

There are two issues with this currently:

1) I currently have my WAN interface set to use PPPoe connection and don't know how to make the change. I tried looking for it online but couldn't find much.

2) For many personal reasons, I currently still have my legacy firewall rules in place, would this change impact or be blocked from working because legacy firewall rules are still in place?

Thanks,
BrokenOnion

1) interfaces > assignments . Find your WAN device, edit with pencil icon. Drop down of "IPv4 Configuration Type". Change there.

You also need to change the assignment away from the PPPoE device to the hardware parent.  Since the assignments API you can do both at once in the same dialog.


Cheers,
Franco

Quote from: franco on November 21, 2026, 10:21:07 PMYou also need to change the assignment away from the PPPoE device to the hardware parent.  Since the assignments API you can do both at once in the same dialog.


Cheers,
Franco

Sorry for the trouble but how can I do that? I set the PPPoE a while ago and don't want to stay without internet when I receive the new router so would be great if you could provide a short instruction where and what I need to change on the Firewall. Also, any idea where the option to block private IPs on WAN interface is located?