OPNSense on Old Laptop

Started by gavinb5, Today at 04:56:22 AM

Previous topic - Next topic
I have an old acer spin 5 that I am trying to install opnsense on. Opnsense has been installed on the laptop and I am using two usb to ethernet adapters for the lan and the wan. Will this work? I am having trouble getting them both to stay stable at the same time. Any help would be great!

A lot of those USB adapters tend to be built around Realtek chipsets. While they run just fine for Windows and often for Linux, these often have less support on BSD-based systems like FreeBSD, which is what OPNsense is based on.

USB itself isn't exactly fit for a stable connection you want to be up at 2am or 2pm, since there are numerous translation layers and can randomly disconnect. I have used USB for a backup WANu running off a phone Hotspot/Tethering, but it isn't for a 24/7 uptime.

My honest opinion, a laptop isn't a good use case for a firewall you want to always be ready for you. Maybe ad a virtual guest, but may be more limited than what you're planning to use it for.

Sorry, it will be difficult if you proceed, do share your progress.

Is there a cheap computer or something that you can recommend?

Quote from: gavinb5 on <strong>Today</strong> at 04:56:22 AMWill this work?
No... Horrible idea in general... Sorry!

Quote from: gavinb5 on <strong>Today</strong> at 06:08:19 AMIs there a cheap computer or something that you can recommend?
Anything you can get your hands on will do, but make sure it has Intel NICs and not RealTek/Broadcom/Marvell/etc. to avoid driver issues!

Intel based Mini PCs with 4 Intel NICs are a popular choice so check if you can get one either new or used ;)
Weird guy who likes everything Linux and *BSD on PC/Laptop/Tablet/Mobile and funny little ARM based boards :)

There are Protectli mini PCs with several reliable network cards attached. I like these because of the smaller form factor, and lower power draw.

The next step up would be a Dell or Lenovo small form factor desktop with one or two low profile PCI-E slots for network cards. A lot of cards with 1G speed may come in two to four copper or SFP ports. Cards that run at 10G may come in single or pair of copper or SFP+ ports.

You can find them on eBay, a local computer recycler that purchases computers from corporate leases that ended.

You can use an old laptop, but it should be old enough to still have a proper (Intel) Ethernet port. Then use VLANs and a small managed switch to split it into multiple ports as required.

I've done this before and it works fine.

Cheers
Maurice
OPNsense virtual machine images
OPNsense aarch64 firmware repository

Commercial support & engineering available. PM for details (en / de).

Laptop on a stick :-)
Deciso DEC750
People who think they know everything are a great annoyance to those of us who do. (Isaac Asimov)