Advice needed: Mini PC for my first OPNsense firewall

Started by sam1970, November 16, 2026, 08:18:21 PM

Previous topic - Next topic
Quote from: tangofan on November 17, 2026, 10:34:39 AMI would recommend the Amibios though, not their coreboot BIOS.
It's improved a lot but coreboot hasn't been bug-free.  Definitely AMI for full features, coreboot if you value the HAP disable function (to neuter the Intel ME).
N5105 | 8/250GB | 4xi226-V | Community

Quote from: sam1970 on November 16, 2026, 11:09:48 PMThanks for the advice. Let me clarify my network setup.

My NAS and main PC have a direct 2.5GbE connection. Both also connect to Switch 1 (managed Netgear, 1GbE).

Switch 2, near my ISP router, connects Sonos, WiFi, IoT devices, TVs, etc.

Currently, both switches are connected by a long Ethernet cable. I'd remove that connection and connect them directly to OPNsense:

- Port 1: WAN (ISP router)
- Port 2: Switch 1 (homelab)
- Port 3: Switch 2 (WiFi/IoT)
- Port 4: Spare

My goal is to isolate the homelab (VLAN 10) from WiFi/IoT (VLAN 20). Gigabit speeds are sufficient.

I'd prefer an established brand such as Protectli and an N305 CPU for future Suricata experiments.
In your setup you actually do not need more than two ports. My Protectli VP2420, but two are empty. You just group the two VLANs for homelab and WiFi/IoT onto one physical port and - since you have managed switches - you can split those VLANs on one switch into various access ports (and connect that second switch, if you want to).

Talking about WiFi: I am using two Ruckus R650 wireless access points (bought cheaply on eBay) in a mesh network. The nice thing about them is that they can handle VLANs, so I have put different SSIDs on different VLANs to keep all nice and separated.

Despite the fact that I only use two ports on my VP2420, I am happy that I have four, because I have configured one of them as a rescue port. In my current configuration the LAN port carries all my VLANs to my core switch (MikroTik CRS310) and all my devices connect to the router over one of the various VLANs. So that rescue port is a way for me to get into OPNsense directly via a network port, if something should go wrong with all those VLANs and I need direct network access to the router.

@tangofan

Thanks for sharing your experience with Zenarmor, especially the performance impact and RAM usage. That's very useful information. Since my switches are limited to 1Gbps, the reduced throughput wouldn't necessarily be a problem, but the memory consumption is worth considering.

I'm not yet convinced I need Suricata or Zenarmor running permanently. I'll probably start with basic OPNsense functionality and experiment with them later. I'll also be choosing AMI BIOS rather than coreboot.

@meyergru

Thanks for pointing out the bridging issue. To clarify, I don't intend to bridge the two LAN interfaces. I would disconnect the cable between the switches and connect each switch to a separate routed OPNsense interface, with its own subnet and firewall rules. VLAN tagging would only be used where needed.

@OPNenthu and @yourfriendarmando

You make a good point about having a spare management port. Being able to access OPNsense directly if something goes wrong with the VLAN configuration is definitely useful.

I'm now leaning towards a device with at least four built-in Intel NICs rather than adding an expansion card.

Thanks everyone for the helpful advice and real-world experiences!

Hi everyone,

Thanks again for all the advice. I've been in contact with Protectli Europe, and they actually recommend the VP4651 for my 24/7 OPNsense firewall.

Their main reasons are the Core i5 processor, dual-channel RAM support, six built-in Intel NICs and completely fanless operation. They consider it a more reliable long-term solution than expanding the N305-based VP3230 with an additional NIC and cooling fan.

I'm now comparing these two models:

Hardware comparison


SpecificationVP2430eVP4651
CPUIntel N150Intel i5-10310U
Generation20252020
Cores / Threads4 / 44 / 8
Base clockNot specified1.7 GHz
Max. turbo3.6 GHz4.4 GHz
CPU power rating6 W15 W
Ethernet4x Intel i226-V6x Intel i226-V
RAMDDR5-4800DDR4-2666
RAM slots12 (dual-channel)
NVMe 228011
CoolingFanlessFanless
Firmware choiceAMI BIOSAMI BIOS
VESA mountIncludedIncluded
Barebone incl. VAT€458.59€700.59

Product links:
https://eu.protectli.com/product/vp2430e/
https://eu.protectli.com/product/vp4651/

RAM costs and total prices

I already own an 8 GB Transcend DDR4-2666 SO-DIMM (TS1GSH64V6B). For the VP4651, I'm considering adding an 8 GB Samsung M471A1K43DB1-CTD for approximately €60.

Protectli confirmed that the specifications match, but the combination hasn't been officially validated, so stability and dual-channel operation aren't guaranteed.

DDR5 prices are currently much higher. Here is my comparison using indicative retail prices:


ConfigurationVP2430eVP4651
8 GB RAM€179€0 (already owned)
Total with 8 GB€637.59€700.59
16 GB RAM€303€60 (additional 8 GB)
Total with 16 GB€761.59€760.59

These totals include VAT but exclude any additional shipping costs. I'll reuse one of my existing WD Red SN700 NVMe drives.

Interestingly, both systems would cost almost exactly the same with 16 GB RAM.

My main concern is whether the older Core i5-10310U is worth choosing over the newer, more energy-efficient N150, especially for continuous 24/7 operation.

I haven't decided whether I'll run Suricata or Zenarmor permanently. For normal routing, VLANs, WireGuard and firewall rules, I understand that either CPU should be sufficient.

Which of these two Protectli models would you choose for a home network and homelab?

I'm particularly interested in long-term reliability, idle power consumption and whether the additional CPU performance and dual-channel RAM of the VP4651 offer a meaningful advantage.

Thanks again for your experiences and advice!