Invalid argument errors while trying to upgrade from 26.1.11 to 26.7

[(MARLOO)]

But this does worry me :

Code Select Expand

Code Select Expand

SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       12
181 Program_Fail_Cnt_Total  0x0022   100   100   000    Old_age   Always       -       11643680983326
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       2794
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       3772716375
199 UDMA_CRC_Error_Count    0x0022   100   100   000    Old_age   Always       -       2

None of those five is close to failing, and to watch


The attributes nearest their thresholds are 173 (41 against 10, average block erase count) and 170 (99 against 10, reserved blocks), which is normal for a drive with 1780 erase cycles and plenty of spare area.



  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       9997
 11 Unknown_SSD_Attribute   0x0022   100   100   000    Old_age   Always       -       140
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2920
170 Unknown_Attribute       0x0033   099   099   010    Pre-fail  Always       -       16
171 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0033   041   041   010    Pre-fail  Always       -       1780
174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       140
181 Program_Fail_Cnt_Total  0x0022   100   100   000    Old_age   Always       -       11643680983326
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       2794
190 Airflow_Temperature_Cel 0x0022   031   021   000    Old_age   Always       -       69 (Min/Max 14/79)



this was a good   troubleshooting.

IMHO, if someone wants to check a disk for errors, this thread is a reasonable starting point.

[nero355]

@nero355 : You always spot the details :)
Good on you man

I had a bit of a storage fetish in the past... LOL! ;)

But the info you have added so far is interesting too!

I feel like it has become a sort of "Lost art" to read the information correctly and the right way by now.
A lot of people just check for "Red/Orange/Green Lights" so to speak and move on instead of diving really into it... :(

[(MARLOO)]

I feel like it has become a sort of "Lost art" to read the information correctly and the right way by now.
A lot of people just check for "Red/Orange/Green Lights" so to speak and move on instead of diving really into it... :(

That's the whole point.

The log speaks before the drive dies.

Read the log as a habit, not as a verdict.

A drive doesn't usually go from healthy to dead between two reboots.

One look a month is all it takes.

[Patrick M. Hausen]

Or run Scrutiny:

https://forum.opnsense.org/index.php?topic=48101.msg242617#msg242617