PPPoE over an unassigned VLAN no longer connects after upgrading to 26.7.3

Started by downset, August 27, 2026, 06:14:47 PM

Previous topic - Next topic
No I did it in that order:

1. download the patch with opnsense-patch -d 3384e551f3
2. copied the patch to /root/3384e551f3.patch
3. checked if the patch is working with  patch -d /usr/local -p2 --dry-run < /root/3384e551f3.patch
4. upgraded to 26.7.6_3
5. PPPoE was not working so i used this command patch -d /usr/local -p2 < /root/3384e551f3.patch
6. did a reboot
7. PPPoE was still not working so I checked /usr/local/etc/inc/interfaces.inc if the lines written in the patch are in there. They were there so I guessed the patch was working
8. did a second reboot and reloaded the ONT to be sure it's not another problem, but that didn't help

Maybe I did something wrong or need to activate something additionally?
But back in 26.7.1 the lines aren't in the interfaces.inc anymore so I'm pretty sure it was at least updated.
Is there something else I can check if to see if the patch is correctly installed?

Regards,

Fanski

Hi Franski,

Okay, just wanted to double check.  Let me try to come up with debug output for your case.  The patch not working would indicate the VLAN is up when it is supposed to wait for it to come up... which is silly because it will be down a split second later?  It's not easy to work around this when the kernel lives on its own schedule.

Maybe you can try to increase the sleep to 5 seconds in order to catch the down window?


Cheers,
Franco