DNS redirect on 26.7 RC2

[Jimmy007]

Greetings,
I did a test install of 27.RC1 and updated to RC2. I reinstalled my backup from 26.1.11_6. However, It seems the DNS redirect to Unbound became non-functional. Any clues?

[Jimmy007]

So - A bit more "upgrade testing" may have uncovered a quirk related to my above issue of DNS. In the General settings for Unbound, the item "Network Interfaces" is set as "All Interfaces". After the update to 26.7.x this selection was now blank, empty as it were. I had to put check marks against "all" of my interfaces - WAN, LAN & OPT to make it equivalent to the former setting.
(Corrected version number above - erroneously had 27.7. We are not quite there yet.)

[franco]

"All interfaces" is still the empty selection, but it shows as "Nothing selected". I'm not sure if that's a recent change, but technically they are the same in any case.


Cheers,
Franco

[franco]

PS: could be from https://github.com/opnsense/core/commit/3d9cccfe4038802807219621ddd49cf668a05144 -- we'll look into it

[franco]

Filed via https://github.com/opnsense/core/issues/10533

[Jimmy007]

So - Have fully updated to 26.7.1-1, all works well except DNS redirect to Unbound. Unbound works well as a DNS if I choose it as my primary DNS.
Suggestions please - I've tried various redirect rules to no avail.

[meyergru]

See, https://forum.opnsense.org/index.php?topic=9245.0 - especially see to it that you do not create a loop to itself.