OPNsense + PROXMOX + VLANs (again)

[spetrillo]

Ok I have a managed 1 gig switch I am using. The config is as follows:

1) PC connected to port 5, with the port set to vlan 2 untagged. I have also set the vlan to 2 on the PC NIC.
2) Server connected to port 6, with the port set to vlan 2/3/20 tagged.
3) Server connected to port 7, with the port set to vlan 10/12 tagged.

VLAN 2 is my LAN interface on OPNsense. I hard coded my PC NIC to 192.168.1.10/26. When I try to ping 192.168.1.1 I get nothing. I then re-configured the PC NIC and removed the vlan from the NIC. I try to ping 192.168.1.1 again and get nothing. Ok what am I doing wrong here?

[Patrick M. Hausen]

If the port on the switch is VLAN 2 untagged, don't set a VLAN on the PC.

[spetrillo]

Still does not work...

My PC's port is set to both vlan 1 and vlan 2 untagged. Do I need to delete the vlan 1 reference from the switch port or just set the PVID to 2?

[Patrick M. Hausen]

PVID 2 and no additional VLAN.

[spetrillo]

And away we go!

Got a connection to the GUI. DHCP gave me an IP, so I know that is working.

Right now I use vlan 1 as my mgmt vlan. In this new build I am moving it to vlan 2 and vlan 1 will no longer be used.

Now to see if I can get to the Proxmox GUI on vlan 3.