[solved] Intel i226 Firmware (see post #39)

[BrandyWine]

Just one question when I ran "dmesg | grep IGC"  I am seeing some references to the older version?  I am assuming that this is a cumulative log that doesn't clear on reboot?

Welcome to freeBSD. You are seeing old boot info. You can change that behavior.

Use the flash utility to get info on all the nics it can address.

[dirtyfreebooter]

dmesg shows multiple boots. so if you just dmesg | greg, and some of your boot logs before the firmware update was done will show the older firmware of course. its easiest to verify with sysctl

Code Select Expand

sysctl dev.igc.0.fw_version
sysctl dev.igc.1.fw_version
sysctl dev.igc.2.fw_version
sysctl dev.igc.3.fw_version
etc