upgrade to 25.7.2 from 25.7.1 killed my wan interface (intel i210)

Started by lebowski, August 21, 2025, 10:53:44 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions
August 29, 2025, 04:34:50 PM #15
I'm sorry, i'm a bit confused here. I'm not very familiar with *nix systems. I tried to follow up on @BrandyWine 's post, where he mentioned:

QuoteAlso check if the proper driver is listed from kernel (the if_ items, etc), because there was a kernel update.
ls /boot/kernel | grep -v kernel

My ifconfig -a shows me "igc" for the coppers, so in kernel list i see "if_igc.ko", etc.

So i did that, logged in with putty in my opnsense box, and ran ls /boot/kernel | grep -v kernel . After this, i got a long list of modules, where i found if_igb.ko and if_igc.ko . I'm actually not sure what i'm looking at .

After reading his remark for the thirtied time ;-) , i know understand the ifconfig -a remark, and yes, now i understand that the interface name was meant. In my case it is igb0 and igb1.

The result of kldstat is:
Quote# kldstat
Id Refs Address                Size Name
 1   56 0xffffffff80200000  216dad8 kernel
 2    3 0xffffffff8236e000    908a0 pf.ko
 3    1 0xffffffff823ff000     4be0 if_enc.ko
 4    1 0xffffffff82404000     3c10 pflog.ko
 5    1 0xffffffff82408000   5e9300 zfs.ko
 6    1 0xffffffff829f2000    1e280 opensolaris.ko
 7    1 0xffffffff82a11000    11a78 pfsync.ko
 8    1 0xffffffff82a23000    16650 if_lagg.ko
 9    2 0xffffffff82a3a000     3558 if_infiniband.ko
10    1 0xffffffff82a3e000     aa30 if_gre.ko
11    1 0xffffffff82a4a000     fb90 carp.ko
12    1 0xffffffff82a5a000     ed60 if_bridge.ko
13    2 0xffffffff82a69000     8990 bridgestp.ko
14    1 0xffffffff83710000     4250 ichsmb.ko
15    1 0xffffffff83715000     2178 smbus.ko
16    1 0xffffffff83718000     3360 uhid.ko
17    1 0xffffffff8371c000     3360 wmt.ko
18    1 0xffffffff83720000     4364 ums.ko
19    1 0xffffffff83725000     4850 nullfs.ko
20    1 0xffffffff8372a000     20f0 coretemp.ko

I don't know how to find out which flavour my i210 controller is without pulling the entire firewall out of the 19" rack. Is there an easier way to find out?
According to this website, it should be the i210-AT nic.
August 29, 2025, 04:51:22 PM #16 Last Edit: August 29, 2025, 04:53:01 PM by Patrick M. Hausen
Try

Code Select
grep igb /var/run/dmesg.boot
and

Code Select
pciconf -lv
That should give you enough information to identify the exact model of your interfaces.
Deciso DEC750
People who think they know everything are a great annoyance to those of us who do. (Isaac Asimov)
Today at 12:38:39 AM #17 Last Edit: Today at 12:40:46 AM by lebowski
Quote[1] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0x88900000-0x8897ffff,                          0x88980000-0x88983fff at device 0.0 on pci2
[1] igb0: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb0: Using 4 RX queues 4 TX queues
[1] igb0: Using MSI-X interrupts with 5 vectors
[1] igb0: Ethernet address: **:**:**:**:**:**
[1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0x88700000-0x8877ffff,                          0x88780000-0x88783fff at device 0.0 on pci5
[1] igb1: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb1: Using 4 RX queues 4 TX queues
[1] igb1: Using MSI-X interrupts with 5 vectors
[1] igb1: Ethernet address: **:**:**:**:**:**
[1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[17] igb1: link state changed to UP
[29] igb1: link state changed to DOWN
[33] igb1: link state changed to UP
[548] igb1: link state changed to DOWN
[552] igb1: link state changed to UP
[1] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0x88900000-0x8897ffff,                          0x88980000-0x88983fff at device 0.0 on pci2
[1] igb0: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb0: Using 4 RX queues 4 TX queues
[1] igb0: Using MSI-X interrupts with 5 vectors
[1] igb0: Ethernet address: **:**:**:**:**:**
[1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0x88700000-0x8877ffff,                          0x88780000-0x88783fff at device 0.0 on pci5
[1] igb1: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb1: Using 4 RX queues 4 TX queues
[1] igb1: Using MSI-X interrupts with 5 vectors
[1] igb1: Ethernet address: **:**:**:**:**:**
[1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[17] igb1: link state changed to UP
[29] igb1: link state changed to DOWN
[32] igb1: link state changed to UP
[239] igb1: link state changed to DOWN
[243] igb1: link state changed to UP
[372] igb0: link state changed to UP
[386] igb0: link state changed to DOWN
[390] igb0: link state changed to UP
[485] igb0: link state changed to DOWN
[508] igb0: link state changed to UP
[515] igb0: link state changed to DOWN
[530] igb0: link state changed to UP
[533] igb0: link state changed to DOWN
[535] igb0: link state changed to UP
[674] igb0: link state changed to DOWN
[675] igb1: link state changed to DOWN
[680] igb1: link state changed to UP
[1] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0x88900000-0x8897ffff,                          0x88980000-0x88983fff at device 0.0 on pci2
[1] igb0: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb0: Using 4 RX queues 4 TX queues
[1] igb0: Using MSI-X interrupts with 5 vectors
[1] igb0: Ethernet address: **:**:**:**:**:**
[1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0x88700000-0x8877ffff,                          0x88780000-0x88783fff at device 0.0 on pci5
[1] igb1: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb1: Using 4 RX queues 4 TX queues
[1] igb1: Using MSI-X interrupts with 5 vectors
[1] igb1: Ethernet address: **:**:**:**:**:**
[1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[17] igb1: link state changed to UP
[29] igb1: link state changed to DOWN
[32] igb0: link state changed to UP
[33] igb1: link state changed to UP
[1] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0x88900000-0x8897ffff,                          0x88980000-0x88983fff at device 0.0 on pci2
[1] igb0: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb0: Using 4 RX queues 4 TX queues
[1] igb0: Using MSI-X interrupts with 5 vectors
[1] igb0: Ethernet address: **:**:**:**:**:**
[1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[1] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0x88700000-0x8877ffff,                          0x88780000-0x88783fff at device 0.0 on pci5
[1] igb1: EEPROM V3.16-0 eTrack 0x800004d9
[1] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[1] igb1: Using 4 RX queues 4 TX queues
[1] igb1: Using MSI-X interrupts with 5 vectors
[1] igb1: Ethernet address: **:**:**:**:**:**
[1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024

Quotehostb0@pci0:0:0:0:      class=0x060000 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f00 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f31 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display'
    class      = display
    subclass   = VGA
ahci0@pci0:0:19:0:      class=0x010601 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f23 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none0@pci0:0:26:0:      class=0x108000 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f18 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine'
    class      = encrypt/decrypt
pcib1@pci0:0:28:0:      class=0x060400 rev=0x0e hdr=0x01 vendor=0x8086 device=0x0f48 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:2:      class=0x060400 rev=0x0e hdr=0x01 vendor=0x8086 device=0x0f4c subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:3:      class=0x060400 rev=0x0e hdr=0x01 vendor=0x8086 device=0x0f4e subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
ehci0@pci0:0:29:0:      class=0x0c0320 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f34 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series USB EHCI'
    class      = serial bus
    subclass   = USB
isab0@pci0:0:31:0:      class=0x060100 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f1c subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Power Control Unit'
    class      = bridge
    subclass   = PCI-ISA
ichsmb0@pci0:0:31:3:    class=0x0c0500 rev=0x0e hdr=0x00 vendor=0x8086 device=0x0f12 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800/CE2700 Series SMBus Controller'
    class      = serial bus
    subclass   = SMBus
igb0@pci0:2:0:0:        class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x15d9 subdevice=0x1533
    vendor     = 'Intel Corporation'
    device     = 'I210 Gigabit Network Connection'
    class      = network
    subclass   = ethernet
pcib4@pci0:3:0:0:       class=0x060400 rev=0xab hdr=0x01 vendor=0x10b5 device=0x8605 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'PLX Technology, Inc.'
    device     = 'PEX 8605 PCI Express 4-port Gen2 Switch'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:4:1:0:       class=0x060400 rev=0xab hdr=0x01 vendor=0x10b5 device=0x8605 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'PLX Technology, Inc.'
    device     = 'PEX 8605 PCI Express 4-port Gen2 Switch'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:4:2:0:       class=0x060400 rev=0xab hdr=0x01 vendor=0x10b5 device=0x8605 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'PLX Technology, Inc.'
    device     = 'PEX 8605 PCI Express 4-port Gen2 Switch'
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:4:3:0:       class=0x060400 rev=0xab hdr=0x01 vendor=0x10b5 device=0x8605 subvendor=0x15d9 subdevice=0x0816
    vendor     = 'PLX Technology, Inc.'
    device     = 'PEX 8605 PCI Express 4-port Gen2 Switch'
    class      = bridge
    subclass   = PCI-PCI
igb1@pci0:5:0:0:        class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x15d9 subdevice=0x1533
    vendor     = 'Intel Corporation'
    device     = 'I210 Gigabit Network Connection'
    class      = network
    subclass   = ethernet
ahci1@pci0:7:0:0:       class=0x010601 rev=0x11 hdr=0x00 vendor=0x1b4b device=0x9230 subvendor=0x1b4b subdevice=0x9230
    vendor     = 'Marvell Technology Group Ltd.'
    device     = '88SE9230 PCIe 2.0 x2 4-port SATA 6 Gb/s RAID Controller'
    class      = mass storage
    subclass   = SATA
Print
Go Up Pages 1 2
User actions