25.7 upgrade issue

[bamf]

Upgraded via WebUI, everything seems fine so far.

[JailYard]

I've had a few issues.

First, I needed to change UEFI settings to legacy in BIOS, otherwise the router hung on reboot (25.1.12 was booting fine).

Now, after a reboot the machine hangs right after the microcode is reinstalled with "Reloading firmware configuration." I can force a reboot but am in an intermediate state (kernel 14.3, but still Opnsense 25.1.12)

[franco]

I was able to upgrade by dropping to shell and typing

Code Select Expand

opnsense-update -ur 25.7 -a 25.7

If the file system is showing errors pre-upgrade for valid reasons I highly recommend not forcing it to upgrade without a disaster plan.


Cheers,
Franco

[psilovybin]

I was able to upgrade by dropping to shell and typing

Code Select Expand

opnsense-update -ur 25.7 -a 25.7

If the file system is showing errors pre-upgrade for valid reasons I highly recommend not forcing it to upgrade without a disaster plan.


Cheers,
Franco

I understand, however, just me and my mom on this router.  worse comes to worse, i'll spool up the backup VM.  There was nothing I could do.  An audit fixed some stuff, but there was no upgrade path moving forward and i had to force an upgrade.  it did work without a hitch.

[CP-Geek]

I've had a few issues.

First, I needed to change UEFI settings to legacy in BIOS, otherwise the router hung on reboot (25.1.12 was booting fine).

Now, after a reboot the machine hangs right after the microcode is reinstalled with "Reloading firmware configuration." I can force a reboot but am in an intermediate state (kernel 14.3, but still Opnsense 25.1.12)

Uninstall microcode, upgrade, reinstall microcode. Had the same issue. (Intel)

[JailYard]

Uninstall microcode, upgrade, reinstall microcode. Had the same issue. (Intel)

That did it, thanks!

[Kb]

I've had a few issues.

First, I needed to change UEFI settings to legacy in BIOS, otherwise the router hung on reboot (25.1.12 was booting fine).

Same issue here except my box doesn't have legacy boot capability.

Guess I am stuck on 25.1.12 until I'm ready to do a fresh install.. not sure why this update isn't UEFI compatible

[burninbogey6]

Uninstall microcode, upgrade, reinstall microcode. Had the same issue. (Intel)

That did it, thanks!

Same here as well.