Updated to 25.1.x.x

Started by beaujofire, May 28, 2025, 05:47:43 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions
May 28, 2025, 05:47:43 PM
Hello to the group. I updated my OPNsense box to the latest stable version yesterday. Once updated, I lost all routing between VLANs, with no SSH and RDP access. In addition, my tailscale VPN fails to connect. I finally accessed my OPNsense GUI after a bit. I noticed on my firewall rules that there is now a small icon to the left in grey that says 17 auto-generated rules. When I click on that, it lists 17 rules in each VLAN, including blocking SSH and other rules. There is no way to disable or edit these rules. How can I disable these new rules and were they in fact added during this latest update?
May 28, 2025, 06:22:05 PM #1 Last Edit: May 28, 2025, 07:07:49 PM by Patrick M. Hausen
No they were not added, they were there all the time. So something particular about your setup does not work with the latest version. Can you be more specific about how these VLANs are configured, for example?
Deciso DEC750
People who think they know everything are a great annoyance to those of us who do. (Isaac Asimov)
May 28, 2025, 07:03:43 PM #2
And as for Tailscale: it depends on how old your installation was and how Tailscale was installed back then - it has changed much, and if you followed the old-style installation, that may cease to work by now.

Also, with the latest release, others report problems, too.
Intel N100, 4 x I226-V, 16 GByte, 256 GByte NVME, ZTE F6005

1100 down / 800 up, Bufferbloat A+
May 28, 2025, 09:46:28 PM #3
I will answer the second reply first. The tail scale was installed and configured about two months ago, so it is recent, and the Opnsense version that I was using was a very recent version.

As for how my VLANs are set up, I am not near that machine at the moment, so I cannot speak to the exact settings. But basically, I have 6 VLANs. Other than that, I will update the VLAN configuration later this evening when I get back home, and I am in front of the only computer that I can currently access the Opnsense GUI with.

I figured that the firewall rules had always been there. But they did not show up in the firewall rules list until this update was applied yesterday. That I am sure of, now, it is possible that I had something misconfigured that caused those rules to be hidden. But all the other bogo and other self-generated rules always showed up along with my rules that I have configured and applied. That's what has me so confused. I have been using PFsense and or Opnsense for at least 10 years. So I thought I was pretty good at it. But this has me baffled.
May 28, 2025, 09:59:37 PM #4
Sorry, I have one isolated system that is still on version 22.1 "for reasons" and in the e.g. Firewall > Rules > LAN view the menu with the "Automatically generated rules" is just right there in the upper right corner.

That has been there for as long as I have been using OPNsense.
Deciso DEC750
People who think they know everything are a great annoyance to those of us who do. (Isaac Asimov)
May 28, 2025, 10:07:30 PM #5
Quote from: Patrick M. Hausen on May 28, 2025, 09:59:37 PMSorry, I have one isolated system that is still on version 22.1 "for reasons" and in the e.g. Firewall > Rules > LAN view the menu with the "Automatically generated rules" is just right there in the upper right corner.

That has been there for as long as I have been using OPNsense.

Thank you for the input. I will look into the area that you mentioned when I get back to the house.
Print
Go Up Pages1
User actions