Unbound issues....

[cgi2099]

Updated to the newest version of OpnSense and now am having issues with unbound.

If I change the unbound port to 5353 and reboot. There are still two processes running on 53

Code Select Expand

unbound  unbound    51797 7   udp4   *:5353                *:*
unbound  unbound    51797 8   tcp4   *:5353                *:*
unbound  unbound    51797 11  udp4   *:5353                *:*
unbound  unbound    51797 12  tcp4   *:5353                *:*
unbound  unbound    51797 15  udp4   *:5353                *:*
unbound  unbound    51797 16  tcp4   *:5353                *:*
unbound  unbound    51797 19  udp4   *:5353                *:*
unbound  unbound    51797 20  tcp4   *:5353                *:*
unbound  unbound    51797 23  udp4   *:5353                *:*
unbound  unbound    51797 24  tcp4   *:5353                *:*
unbound  unbound    51797 27  udp4   *:5353                *:*
unbound  unbound    51797 28  tcp4   *:5353                *:*
unbound  unbound    51797 31  udp4   *:5353                *:*
unbound  unbound    51797 32  tcp4   *:5353                *:*
unbound  unbound    51797 35  udp4   *:5353                *:*
unbound  unbound    51797 36  tcp4   *:5353                *:*
unbound  unbound    75119 5   udp4   127.0.0.1:53          *:*
unbound  unbound    75119 6   tcp4   127.0.0.1:53          *:*


This didn't happen before I updated. I need it off of 127.0.0.1:53 because that is where my AdGuard is.

Even did a reinstall with config restore, same thing happens.

Any thoughts?

Thank you,
Josh

[cgi2099]

I can force close process 75119 and all is good. But on reboot I have the same problem again.

Any ideas?

[appasquatic]

Did you change the listening port to 5353 because you want to run DoT locally?

[cgi2099]

Did you change the listening port to 5353 because you want to run DoT locally?

Yes, has been working great for a couple of years : )

[cgi2099]

Fix was to comment out the: "unbound_enable" line (also can be "local_unbound")

Located: /etc/rc.conf

Thank you some much @Mokkori-Man for the fix : )


*Edit, problem was two unbound instances running.

[newsense]

Leave Unbound running on 53, use Port Forwarding on the (V)LANs to redirect DNS queries to the new port you're running AGH on.