Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.1 Legacy Series
»
Page Fault / Fatal Trap
« previous
next »
Print
Pages: [
1
]
Author
Topic: Page Fault / Fatal Trap (Read 6005 times)
dredhorse
Newbie
Posts: 8
Karma: 0
Page Fault / Fatal Trap
«
on:
February 01, 2017, 06:02:11 pm »
Hi,
I get
https://www.dropbox.com/s/pe2vqbjmx0k65tj/OPNSense_2017-02-01_17-59-14.png?dl=0
This is running on ESXi 6.5, the system was upgraded vom 16.7 fully patched. I rolled back to that point (snapshots for the win).
Any idea? I can also roll forward again if needed if that helps troubleshooting.
Regards
Don
Logged
the_wolf
Newbie
Posts: 26
Karma: 3
Re: Page Fault / Fatal Trap
«
Reply #1 on:
February 02, 2017, 03:31:20 am »
Need 1 gig of ram in virtual machines.
Logged
dredhorse
Newbie
Posts: 8
Karma: 0
Re: Page Fault / Fatal Trap
«
Reply #2 on:
February 02, 2017, 09:31:07 am »
It has 2 Gig, I can give it more.
Dashboard shows that it is using around 1 GB.
Don
Logged
franco
Administrator
Hero Member
Posts: 17672
Karma: 1613
Re: Page Fault / Fatal Trap
«
Reply #3 on:
February 02, 2017, 01:37:12 pm »
Can you disable shaper before upgrade? Can you live on 17.1 without the shaper if this keeps crashing? It's definitely shaper related is what I'm trying to say.
I think there are patches in FreeBSD (not 11.0) that we could try in the next week.
Cheers,
Franco
Logged
dredhorse
Newbie
Posts: 8
Karma: 0
Re: Page Fault / Fatal Trap
«
Reply #4 on:
February 02, 2017, 02:39:08 pm »
sure can do, it didn't work in 16.7 nevertheless (MultiWan), it started working in 17.1 but... better a working setup than crashes.
Don
Logged
franco
Administrator
Hero Member
Posts: 17672
Karma: 1613
Re: Page Fault / Fatal Trap
«
Reply #5 on:
February 02, 2017, 05:37:47 pm »
Hi Don,
Did this happen during a (re)configure or under traffic?
I found no bugs or patches regarding wf2pq_dequeue() in FreeBSD, but remember seeing it once in one of our crash report without an e-mail address attached, so no way to contact the user.
This is specifically for "Weighted Fair Queueing" option and other algorithms have their own implementations. Not sure where to go from here. At least a "bt" command dump from that panic would be a plus to have on record.
Cheers,
Franco
Logged
dredhorse
Newbie
Posts: 8
Karma: 0
Re: Page Fault / Fatal Trap
«
Reply #6 on:
February 02, 2017, 07:12:03 pm »
Hi,
attached the config
https://www.dropbox.com/s/xwmi9lcysrjv20h/Traffic_Shaper_2017-02-02_19-07-57.png?dl=0
It did happen during traffic. But also as I did reconfigure some stuff in the webproxy, but I guess that is unrelated as I did just checkbox something.
Don't know how to do the bt command... vm interface is not accessible and I did notice it because my network connection went down, so I guess that ssh will also not be possible.
I could probably get you a VM crashdump (NMI) that can be triggered.
Don
Logged
franco
Administrator
Hero Member
Posts: 17672
Karma: 1613
Re: Page Fault / Fatal Trap
«
Reply #7 on:
March 02, 2017, 08:38:41 am »
Hi Don,
Following up on this only now, sorry. Dump won't be helpful as this is out of scope and would need to be reported to FreeBSD. But the Weighted Fair Queueing option is not maintained much as far as I can see so circumventing the problem by using a different algorithm would be an option when the problem recurs.
Cheers,
Franco
Logged
dredhorse
Newbie
Posts: 8
Karma: 0
Re: Page Fault / Fatal Trap
«
Reply #8 on:
March 02, 2017, 09:28:41 am »
Hi,
no Problems, I will look into at, atm I don't have really any need for traffic shaping per see.
Thanks for your help.
Regards
Marcus
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.1 Legacy Series
»
Page Fault / Fatal Trap