Wireguard No Handshake

[breimer273]

Hello, new OPNSense user here. Having some trouble getting a wireguard connection configured. I have followed the guide here: https://docs.opnsense.org/manual/how-tos/wireguard-client.html

Then I used the peer generator to create the config for my client (wireguard app on ios) but the handshake does not complete.

I have allowed the firewall for port 51820, and I have confirmed that the firewall is allowing the traffic by looking at the logs.

I've attached some screen shots of my OPNSense config. I'll edit the post and add my client config when I get to it.

[breimer273]

Have attached my client configuration screenshot to this post

[wirehire]

have you tried with another key pair?

the log in ios , say no handshake?

you can see udp pakets in the firewall log?

which ips are in the allowed config from your ios device?

[breimer273]

I did try making the key pair a couple of times. I used the peer generator a couple of times and also made it manually in the wireguard client on ios.

Allowed IPs is 0.0.0.0/0, ::/0

I do see 1 packet in the firewall log. See screenshot.

I'm also attached the log from my client. But the error says that it did not receive

Does it make a difference that my VPN network is 10.0.0.0/24 and my other network is 192.168.1.0/24? Maybe there is some traffic that isn't going through because the 192.168.1 subnet isn't allowed somehow?

[wirehire]

for the handshake ,it needs only the wg ips/net

can you post the full config from the ios device , without priv keys?

[breimer273]

Here's the log from the client

EDIT: Modified the log file to only include this connection.

[breimer273]

Full config
https://nextcloud.reimerfamily.net/s/KosxLo6aLw7M4PL

[breimer273]

Well, I appear to have corrected the issue. The solution appears to be.... a reboot.

I tried restarting the wireguard service multiple times. But for some reason that wasn't working. A full reboot of the device and everything is working great.

Thanks for the help!