Stalled upgrade to 24.7.6 shutting down crowdsec

[RonD]

Upgrading from 24.7.5_3 to 24.7.6 and the upgrade appears to be stalled while trying to shutdown crowdsec.  Has anyone else experienced this?  Any fixes or work-arounds?

Logs indicate upgrading crowdsec form 1.6.3_1 to 1.6.3_2 and extracting the new package which finished.  It then attempted to shutdown the crowdsec app and stopped two PIDS after which it essentially stalled.  I've been at that screen for the past 10 to 15 minutes.  OPNsense continues to run with Internet access.

I have not tried a reboot yet and don't want to if it will impact the upgrade.

[GrantSquirt8415]

From this thread: https://forum.opnsense.org/index.php?topic=43309.0

Open a terminal command line and then

killall -9 crowdsec

[RonD]

Rebooting seemed to resolve the immediate issue and I will keep an eye out for any oddities it may have created

[RonD]

From this thread: https://forum.opnsense.org/index.php?topic=43309.0

Open a terminal command line and then

killall -9 crowdsec

I'll give this a shot next time.  Thanks for the quick reply

[buixor]

Hello,

Please see as well : https://discourse.crowdsec.net/t/bug-opnsense-24-7-5-crowdsec-1-6-3/2057

[Shayoo]

Hi, the problem is still there Opnsense business when ugprade from 24.10.1 to 24.10.2
More than half of my installations are blocked on

Code Select Expand

Stopping crowdsec.
Waiting for PIDS: 14449.
Waiting for PIDS: 92556
On the crowdsec thread it says it's been fixed since community 24.7.6
https://discourse.crowdsec.net/t/bug-opnsense-24-7-5-crowdsec-1-6-3/2057

Business 24.10.2 is based on community 24.7.12, so this should be fixed, but it doesn't seem to be the case.

Does anyone else have the problem?