Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Tutorials and FAQs
»
How to access Hitron CODA56 modem admin page
« previous
next »
Print
Pages: [
1
]
Author
Topic: How to access Hitron CODA56 modem admin page (Read 4054 times)
simdim
Newbie
Posts: 13
Karma: 0
How to access Hitron CODA56 modem admin page
«
on:
December 20, 2023, 06:38:12 pm »
Finaly got Hitron CODA56 admin/stats page working from behind Opensense.
Modem only responds to
https://192.168.100.1/home/html
from the same network.
Solution:
Create virtual IP on the interface facing the modem.
Create Outgoing NAT to the Modem
Create LAN allow rule - it is critical not to specify gateway in the rule
Logged
bvierra
Newbie
Posts: 1
Karma: 0
Re: How to access Hitron CODA56 modem admin page
«
Reply #1 on:
January 10, 2024, 08:37:35 pm »
An even easier way to do this:
System -> Routes: Add a new static route (the + button) with the following settings
Network Address: 192.168.100.1/32
Gateway: WAN
Hit save and the apply the change.
Logged
mw88
Newbie
Posts: 9
Karma: 0
Re: How to access Hitron CODA56 modem admin page
«
Reply #2 on:
January 14, 2024, 11:16:24 pm »
Quote from: bvierra on January 10, 2024, 08:37:35 pm
System -> Routes: Add a new static route (the + button) with the following settings
[...]
Gateway: WAN
I'm trying to do exactly this. However, the "Gateway" dropdown only has my ipv4 and ipv6 loopback addresses, and my
public
ipv4 and ipv6 addresses. Is this right?
Note: it doesn't work, so I wonder if I'm missing something else? My FW is deny all by default, so would I need additional rules?
Logged
GoofGarage
Newbie
Posts: 1
Karma: 0
Re: How to access Hitron CODA56 modem admin page
«
Reply #3 on:
September 21, 2024, 12:13:48 am »
So here's how to do this, and yes, it does work 100% as of 2024-09-20. For this, I'm using OPNsense 24.1.10_3
First, create a Virtual IP on your WAN Interface
1.
Interfaces -> Virtual IPs -> Settings
2. Click the
{+}
button
3. Enter the following...
... Mode:
IP Alias
... Interface:
WAN
... Network / Address:
192.168.100.2/30
... Description:
Hitron CODA56 [Xfinity, Cable Modem]
4. Click the
[Save]
button.
5. Click the
[Apply]
button.
Next, create a Hybrid NAT Outbound rule. This will need to be the first rule applied, before all others.
1.
Firewall -> NAT -> Outbound
2. By default, 'Mode' will be set to "Automatic outbound NAT rule generation". Change it to
"Hybrid outbound NAT rule generation"
3. Click the
[Save]
button.
4. Click the
{+}
button under 'Manual rules'
5. Enter the following...
... Interface:
WAN
... TCP/IP Version:
IPv4
... Source port:
any
... Destination address:
[Single host or network], [192.168.100.1], [32]
... Destination port:
any
... Translation / target:
[192.168.100.2 (Hitron CODA56 [Xfinity, Cable Modem])
... Description:
Hitron CODA56 Admin Page
6. Click the
[Save]
button.
7. Click the
[Apply]
button.
Now, navigate to
https://192.168.100.1/
in your web browser.
There's no log in, as this is all handled by Comcast. You'll have the
'System Information'
,
'DOCSIS WAN'
and
'LAN Port Status'
tabs.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Tutorials and FAQs
»
How to access Hitron CODA56 modem admin page