[SOLVED] Update to 24.7.2 results in kernel panic

[franco]

A damaged zpool crashing the kernel? That would be unpredictable and best course of action is probably a reinstall.

FWIW, I'm only speculating on a forum looking at the information given at the time they were.


Cheers,
Franco

[mifi42]

I will have a try today. But first I wall save and export my current config... 

Mark from FreeBSD provided a patch so I built a test kernel with agp reenabled and the fix in place.

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=281035#c8

# opnsense-update -zkr 24.7.3-agp

Just in case to recover reboot into kernel.old from the boot menu (if possible).

Though it looks like the most likely fix at the moment. To confirm-confirm test if agp was already loaded when it boots ok when initial 24.7.2 would not:

# kldload agp

Should complain about already being loaded.

Though we will probably keep the driver disabled by default unless it creates other problems with 23.7.3. Only one way to find out either way.



Cheers,
Franco

[mifi42]

On

Code: [Select]

opnsense-update -zkr 24.7.3-agp
No signature found.
opnsense-update -zfikr 24.7.3-agp
No update found.
Did you remove the kernel already?
Cheers,
Michiel

Mark from FreeBSD provided a patch so I built a test kernel with agp reenabled and the fix in place.

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=281035#c8

# opnsense-update -zkr 24.7.3-agp

Just in case to recover reboot into kernel.old from the boot menu (if possible).

Though it looks like the most likely fix at the moment. To confirm-confirm test if agp was already loaded when it boots ok when initial 24.7.2 would not:

# kldload agp

Should complain about already being loaded.

Though we will probably keep the driver disabled by default unless it creates other problems with 23.7.3. Only one way to find out either way.



Cheers,
Franco

[franco]

No it's here: https://pkg.opnsense.org/FreeBSD:14:amd64/snapshots/sets/

Do you have a mirror selected that is not synced?


Cheers,
Franco

[franco]

Meh, dumb, I called it 23.7.3-agp

[mifi42]

Rebooting as we speak.
Wait for it...
wait for it...
Yes, it booted. The patch seems to work.

Meh, dumb, I called it 23.7.3-agp

[mifi42]

On the dashboard: FreeBSD 14.1-RELEASE-p3

Code: [Select]

# kldload agp
module already loaded or in the kernel

Correct.

Michiel

Rebooting as we speak.
Wait for it...
wait for it...
Yes, it booted. The patch seems to work.

Meh, dumb, I called it 23.7.3-agp

[franco]

Thanks a lot, I'll let FreeBSD know to commit the patch.


Cheers,
Franco

[benkill15]

The secret has been revealed. 

Of course I mean 24.7.3.


Cheers,
Franco

Hi All,

Update below...

Hardware: Watchguard XTM505. 3GB DDR2 using single SATA Samsung 870 EVO 256GB SSD.

I clean installed 24.7 using serial image and chose ZFS. Configured for connectivity only. Upgraded to 24.7.3 using web GUI without any issues and rebooted normally.

Happy to test anything if anyone needs anything additional

Cheers and thank you to Franco, and the OPNsense team.

[mroess]

Hi All,

the update from 24.7.2 with the ZFS patch removed to 24.7.3 went smoothly. My box boots up normal.

I have verified that the ZPOOL_IMPORT_PATH is in the rc file again.

So the Topic is solved for me.

Regards

Marian

[franco]

Thanks for confirming! The actual fix is in FreeBSD now:

https://cgit.freebsd.org/src/commit/?id=12500c1428


Cheers,
Franco

[nokos]

Hi,
I can confirm that the update from 24.7 to 24.7.3_1 on Lanner FW-7568 went smoothly.

Thank you!

[waxhead]

Confirming that upgrade to 2.4.3 worked just fine for me as well. Thanks for the fix to everyone involved.