Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
24.7 Production Series
»
Upgrade to 24.7.1 from 24.7_9 cautionary note
« previous
next »
Print
Pages: [
1
]
Author
Topic: Upgrade to 24.7.1 from 24.7_9 cautionary note (Read 1066 times)
retatefw
Newbie
Posts: 10
Karma: 2
Upgrade to 24.7.1 from 24.7_9 cautionary note
«
on:
August 08, 2024, 03:44:57 pm »
I upgraded to 24.7.1 from 24.7_9. After the reboot I could not access the firewall via either web access or ssh. DNS requests to the firewall were reporting timeouts. The firewall may have been allowing some traffic through, but I did not investigate. I was able to do a console login and reboot. The firewall came up after the second reboot and is functioning normally.
Logged
franco
Administrator
Hero Member
Posts: 17619
Karma: 1605
Re: Upgrade to 24.7.1 from 24.7_9 cautionary note
«
Reply #1 on:
August 08, 2024, 04:08:22 pm »
It was more likely the reboot, not the update. My basic advice for trying to figure this out. It's probably going to happen again.
Cheers,
Franco
Logged
retatefw
Newbie
Posts: 10
Karma: 2
Re: Upgrade to 24.7.1 from 24.7_9 cautionary note
«
Reply #2 on:
August 08, 2024, 09:19:40 pm »
Franco, thank you for your input. I tried two more reboots. The first worked, and the second one hung. The two changes I have made since upgrading to 24.7 is to migrate DHCP to KEA DHCP and to add NUT to SNMP query a UPS unit. KEA DHCP is working as expected, and the NUT diagnostics page is displaying the information for the UPS unit it is querying so. I will have to investigate further to see if one of those changes is responsible for the reboot failure.
Logged
Meg
Newbie
Posts: 28
Karma: 1
Re: Upgrade to 24.7.1 from 24.7_9 cautionary note
«
Reply #3 on:
August 09, 2024, 04:12:57 am »
I had the same problem when I upgraded from Gui. I restored from a backup and upgraded via console and everything was fine. I have had problems on several upgrades when performed via Gui.
Logged
OilerNut
Newbie
Posts: 1
Karma: 0
Re: Upgrade to 24.7.1 from 24.7_9 cautionary note
«
Reply #4 on:
August 11, 2024, 01:50:39 am »
I updated my one opnsense box through the gui and was fine, but it broke the remote site one. Was running 24.7 fine, did the update through the GUI and it hung up on the "please wait while the firewall is rebooting screen". Went on site, powered off the box and powered it back on and it is running 24.7.1, but no gui access.
Other than the GUI interface not working, everything else seems to be fine.
Logged
newsense
Hero Member
Posts: 1024
Karma: 77
Re: Upgrade to 24.7.1 from 24.7_9 cautionary note
«
Reply #5 on:
August 11, 2024, 04:34:41 am »
Log in through SSH/console and check for updates again, probably something didn't finish there.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
24.7 Production Series
»
Upgrade to 24.7.1 from 24.7_9 cautionary note