Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
24.1 Legacy Series
»
Peer generator: WireGuard Instance not saved / QR-Code Config not working
« previous
next »
Print
Pages: [
1
]
Author
Topic: Peer generator: WireGuard Instance not saved / QR-Code Config not working (Read 2412 times)
evildevil
Newbie
Posts: 9
Karma: 2
Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
on:
April 04, 2024, 11:30:06 pm »
Hello all,
I'm not sure if this is a specific issue from my environment, but I updated to 24.1.5 today and wanted to try the Wireguard Peer generator.
I ran into two issues:
1. The "Instance" selected in the Peer generator is not saved after clicking on the "Store and generate next" Button.
If you switch back to the "Peers", the Instance of the newly created Peer is empty.
2. I scanned the QR-Code on my Android Phone using "Wireguard for Android 1.0.20231018". Importing the config is working, but I can not establish the connection. Error message on the Phone is "Fehler beim Starten des Tunnels: at least on address must be specified"
I have to edit the configuration on the Phone and enter an IP-Address at the "Interface -> Adressen" Field that is in the Instance's IP range to make it work.
Is anybody else having these issues?
Best regards,
Patrick
Logged
evildevil
Newbie
Posts: 9
Karma: 2
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #1 on:
April 04, 2024, 11:32:09 pm »
Seems like Issue #1 was addressed already:
https://forum.opnsense.org/index.php?topic=39813.msg195181#msg195181
Yes - I updated to 24.1.5_2 and it is fixed.
Thank you - that was really fast ;-)
Best regards,
Patrick
«
Last Edit: April 04, 2024, 11:37:35 pm by evildevil
»
Logged
Milkwyrm
Newbie
Posts: 4
Karma: 0
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #2 on:
April 05, 2024, 12:06:14 am »
Would be nice if they added a couple more fields to the page for "Address =" and "DNS =" under
interface
, as they do for the private key, so that they are already in the config field.
Logged
stanthewizzard
Jr. Member
Posts: 63
Karma: 1
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #3 on:
April 05, 2024, 08:27:08 am »
Hello
I'm with 24.1.5_2
and when trying to scan the QR this is still unvalid
I'm lost
Thanks for help
Logged
evildevil
Newbie
Posts: 9
Karma: 2
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #4 on:
April 05, 2024, 09:13:56 am »
Hi,
Quote from: stanthewizzard on April 05, 2024, 08:27:08 am
I'm with 24.1.5_2
and when trying to scan the QR this is still unvalid
I had this issue once yesterday - it looked like the QR-Code was not scanned properly and rescanning the QR-Code fixed the problem (maybe you could try cleaning the Mobile Phone's Camera lens / Computer Monitor or using different angle/distance to scan the QR-Code).
You can also scan the QR-Code with your Phone's default Camera App and it should decode the QR-Code as Text, which should be the same Information that is displayed at the Peer Generator "Config" Textbox.
Hope this helps,
Patrick
Logged
stanthewizzard
Jr. Member
Posts: 63
Karma: 1
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #5 on:
April 05, 2024, 10:50:03 am »
Not working
same screen same phone with wireguard-easy it works
so not on iPhone side
the plain text isnstrange btw
Logged
maclinuxfree
Jr. Member
Posts: 57
Karma: 2
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #6 on:
April 05, 2024, 11:07:34 pm »
Peer Generator Template (with IPs and DNS Settings) and export as conf file would also be nice.
Logged
magenta
Newbie
Posts: 2
Karma: 0
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #7 on:
April 17, 2024, 02:36:51 pm »
In my case the peer generated with the generator is never saved, not even an empty entry exits.
The QR-code shown is correct.
Don't seem to find any error message.
Am using v24.1.5_3 - did not get it to work on two physical instances.
Any hint?
Thank you.
Logged
TomS2
Newbie
Posts: 1
Karma: 0
Re: Peer generator: WireGuard Instance not saved / QR-Code Config not working
«
Reply #8 on:
May 16, 2024, 09:47:07 am »
I've got the same issue:
New generated peer-settings won't get saved in the wireguard peer list on the opnsense (but it shows no error message on the generator page).
I'm using OPNsense 24.1.6-amd64
The generation of a peer worked once (and was saved on the opnsense). Further peers generated by the peer generator are not saved.
Any hints?
Thanks,
Tom
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
24.1 Legacy Series
»
Peer generator: WireGuard Instance not saved / QR-Code Config not working