2024-02-10T11:53:08 Informational ntpd failed to init interface for address fd00::225:90ff:fea8:83 2024-02-10T11:53:08 Error ntpd unable to create socket on em0 (7) for fd00::225:90ff:fea8:83#123 2024-02-10T11:53:08 Error ntpd bind(25) AF_INET6 fd00::225:90ff:fea8:83#123 flags 0x11 failed: Address already in use 2024-02-10T11:53:08 Informational ntpd failed to init interface for address fe80::225:90ff:fea8:83%1 2024-02-10T11:53:08 Error ntpd unable to create socket on em0 (6) for fe80::225:90ff:fea8:83%1#123 2024-02-10T11:53:08 Error ntpd bind(25) AF_INET6 fe80::225:90ff:fea8:83%1#123 flags 0x11 failed: Address already in use
Can you explain what this setting is for? I thought I was setting which interfaces NTP would listen (and answer) on.My intent was to prevent exposing my NTP to the world. (fwiw I do not have this port open on the fw).I will flip this to the recommended value to see if it changes the behavior.