3D print for DEC740/750 hardware

Started by darksideoverland, January 19, 2024, 11:31:44 PM

Previous topic - Next topic
I made a cooling cover that takes a USB-powered 80mm fan to actively cool a DEC740/750. Please enjoy as you will, all descriptions are in the links below.




https://makerworld.com/en/models/147498#profileId-160928
https://makerworld.com/en/models/147423#profileId-160862

Thanks - I printed this out of black ABS - works great. Took my temps from 55C down to 35C!

Quote from: darksideoverland on January 19, 2024, 11:31:44 PMI made a cooling cover that takes a USB-powered 80mm fan to actively cool a DEC740/750. Please enjoy as you will, all descriptions are in the links below.
You guys are creazy to use two 10GbaseT modules with the DEC700. The NVMe is right behind the SFP+ connectors. You never run into issues with the SDD?

When I did some testing with one 10GbaseT module and compiling a kernel I ended up with (temporary) write errors due to the heat. That is without your cooling cover, of course.
Deciso DEC740