Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Zenarmor (Sensei)
»
zenamor missing wan interface em0 (and not blocking anything anymore)
« previous
next »
Print
Pages: [
1
]
Author
Topic: zenamor missing wan interface em0 (and not blocking anything anymore) (Read 1947 times)
daudo
Newbie
Posts: 21
Karma: 4
zenamor missing wan interface em0 (and not blocking anything anymore)
«
on:
September 29, 2023, 09:45:16 am »
Hi,
after working for quite a long time, zenamor has stopped working for me some weeks ago following the latest major update. What essentially happens is nothing. While I can have a look at open web/dns/tls/... sessions (so it appears to be intercepting traffic), nothing is blocked or "protected" at all anymore.
The best guess I have about this is because in the new configuration my wan interface em0 is missing, see the attached screenshots.
Any ideas?
Logged
beki
Jr. Member
Posts: 90
Karma: 10
Re: zenamor missing wan interface em0 (and not blocking anything anymore)
«
Reply #1 on:
September 29, 2023, 10:25:57 am »
Hi daudo,
By default WAN interface or default gateway interface of the firewall is not displayed on the Zenarmor configuration page, so you cannot choose to secure them.
For more information:
https://www.zenarmor.com/docs/troubleshooting/configuration#wan-interface-not-detected
Could you verify/confirm that filtering is not working on your LAN interface?
If not, you may share your log and config files by clicking on Send Feedback link.
https://www.zenarmor.com/docs/support/reporting-bug#as-of-v114
Bests
Logged
daudo
Newbie
Posts: 21
Karma: 4
Re: zenamor missing wan interface em0 (and not blocking anything anymore)
«
Reply #2 on:
September 29, 2023, 09:33:27 pm »
Hi Beki,
thanks for the information. I wasn't aware that the WAN interface wouldn't be shown on purpose and subsequently didn't really check the new config UI, because I thought that all my issues were due to the "missing" interface.
However, after checking the available config options, it seems that I simply didn't configure any blocks and after enabling them, everything works now.
Thanks again!
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Zenarmor (Sensei)
»
zenamor missing wan interface em0 (and not blocking anything anymore)