Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Opnsense failing - maybe unbound?
« previous
next »
Print
Pages: [
1
]
Author
Topic: Opnsense failing - maybe unbound? (Read 623 times)
tre4bax
Full Member
Posts: 151
Karma: 4
Opnsense failing - maybe unbound?
«
on:
September 07, 2023, 12:48:09 pm »
For the last couple of weeks since I upgraded to the 23.7 I have been having a problem with my opnsense router.
1) Sometimes my machines loose internet access, but the network seems to be working. When this happens I cannot access the opnsense webui either. Poking the powerbutton rectifies the machine shutsdown cleanly then works when rebooted.
2)The router randomly reboots. I become aware that the whole network is just not working. After a bit it starts working again and when I access the webui it is clear the router has rebooted.
The device itself is about a month old now based on an N5105 with 16gb ram.
I've made sure I've done all the updates I have found but alas still no luck figuring out what caused it.
Situation 1 just happened again prompting me to finally get around to asking if anyone has any ideas. 25pages back in the log at the time it happened I see this.
<6>pid 61824 (unbound), jid 0, uid 59: exited on signal 11
2023-09-07T09:42:00 Notice kernel <6>pid 25031 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:40:09 Notice kernel <6>pid 4217 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:40:00 Notice kernel <6>pid 97999 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:39:00 Notice kernel <6>pid 85400 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:36:00 Notice kernel <6>pid 52843 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:34:00 Notice kernel <6>pid 25958 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:30:00 Notice kernel <6>pid 68520 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:28:00 Notice kernel <6>pid 38821 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:27:00 Notice kernel <6>pid 26862 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:25:00 Notice kernel <6>pid 566 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:24:01 Notice kernel <6>pid 84849 (python3.9), jid 0, uid 0: exited on signal 11 (core dumped)
2023-09-07T09:21:00 Notice kernel <6>pid 40608 (ld.lld), jid 0, uid 0: exited on signal 11 (core dumped)
python error messages also happen when situation 2 occurs as well. I seem to remember around the time it started that the updates did an update to python. Is it possible this is corrupt or something? Is there a repair option?
Logged
CJ
Hero Member
Posts: 832
Karma: 30
Re: Opnsense failing - maybe unbound?
«
Reply #1 on:
September 20, 2023, 04:22:50 pm »
There's a health audit but I would do some burn in testing on your hardware. Could be bad ram, etc causing your problems.
Logged
Have Answer, Will Blog
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Opnsense failing - maybe unbound?