Repeating error in my logs

[dcol]

My logs are filled with errors. Using v23.7.1_3
This is a repeating error every second in the logs there are actually thousands of these. Using DHCP on the WAN
How can I fix this?

2023-08-08T08:46:36-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804'' returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-08T08:45:53-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804'' returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-08T08:45:42-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804'' returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-08T08:44:37-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804'' returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-08T08:44:31-04:00   Error   opnsense   /usr/local/etc/rc.routing_configure: ROUTING: refusing to set inet gateway on addressless wan(igc0)   

[franco]

These logs are from before 23.7.1 but I suppose they show radvd being stopped via PID file whose PID no longer exists because the PID file is stale. I'm pondering to remove these errors altogether as it would be more costly to check the PID on each try as well..

> 2023-08-08T08:44:31-04:00   Error   opnsense   /usr/local/etc/rc.routing_configure: ROUTING: refusing to set inet gateway on addressless wan(igc0)

DHCP not responding quickly enough? Likely a transient error. FreeBSD does bad things when pointing a route via an interface without an address (using 0.0.0.0 as traffic source).


Cheers,
Franco

[dcol]

Yes they were older, but it is still happening, just not as often. How can I track down this error? Also it shows dhpdv6, when this firewall has only one static IP with no IPv6 assigned. Where is this error coming from?

023-08-15T10:34:33-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-15T10:28:05-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-15T10:27:54-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-15T10:26:51-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-14T15:29:30-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-14T15:28:41-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-14T15:28:30-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'   
2023-08-14T15:27:27-04:00   Error   opnsense   /usr/local/etc/rc.linkup: The command '/bin/kill -'TERM' '77804''(pid:/var/dhcpd/var/run/dhcpdv6.pid) returned exit code '1', the output was 'kill: 77804: No such process'

[phantomsfbw]

I have the same issue.  My Kills so to speak are 51511, 18534, 44127, and 19992. Did you ever figure out what this was?