Upgradethread 23.1.11_1 to 23.7

[lilsense]

no AdGuard Service on this device.

[lilsense]

Looks like that after the upgrade the suricata does not work and found the link below that may be why.

https://forum.opnsense.org/index.php?topic=35130.0

can someone let me know...

[lilsense]

Is there a way to roll back from 23.7 back to 23.1...  :'(

Can I use this to roll back: https://docs.opnsense.org/manual/opnsense_tools.html

[newsense]

Any undesirable interaction between the new version and AdGuard to be aware of?

None

[newsense]

Looks like that after the upgrade the suricata does not work and found the link below that may be why.

https://forum.opnsense.org/index.php?topic=35130.0

can someone let me know...

They were on suricata-devel and you're probably not. You can try disabling it and see i it helps.

Best to open a dedicated thread for your issue.

Reverting won't work, I'd recommend waiting or 23.7.1 next week instead while discussing on the new thread

[lordxenu]

Hello

The upgrade appears to be failing / not working for me.
I am running

OPNsense 23.1.11_1-amd64
FreeBSD 13.2-RELEASE-p1
OpenSSL 1.1.1u 30 May 2023

System is a Dell Wyze 5070 with a Mellanox Connect-X 3 card and i'm using a router on a stick approach. Multiple WAN links. The system appears to download and extract files, the says please reboot, so I reboot, but the system still reports itself as being on 23.1.11_1 and tells me an upgrade to 23.7 is available. I have also performed the upgrade via the CLI and I don't see any errors.

However when doing an audit I see tons of errors relating to PHP. The error log is too large for me to paste into pastebin or attach it. (It's 1.02MB) the only errors i see though are like this

Code: [Select]

opnsense has a missing dependency: php81-session
opnsense has a missing dependency: php81-phalcon
opnsense has a missing dependency: php81-xml
opnsense has a missing dependency: php81-simplexml
opnsense has a missing dependency: php81-dom
opnsense has a missing dependency: php81-ctype
opnsense has a missing dependency: php81-filter
opnsense has a missing dependency: php81-pear-Crypt_CHAP
opnsense has a missing dependency: php81-phpseclib
opnsense has a missing dependency: php81-google-api-php-client
opnsense has a missing dependency: php81-sockets
opnsense has a missing dependency: php81-ldap
opnsense has a missing dependency: php81-pecl-radius
opnsense has a missing dependency: php81-curl
opnsense has a missing dependency: php81-gettext
opnsense has a missing dependency: php81-sqlite3
opnsense has a missing dependency: php81-pdo
opnsense has a missing dependency: php81-zlib
there are dozens and dozens of errors about something "google" related too ?

e.g.

Code: [Select]

php82-google-api-php-client-2.4.0: missing file /usr/local/share/google-api-php-client/vendor/google/apiclient-services/src/Google/Service/DLP/Resource/InfoTypes.php
php82-google-api-php-client-2.4.0: missing file /usr/local/share/google-api-php-client/vendor/google/apiclient-services/src/Google/Service/DLP/Resource/Locations.php
php82-google-api-php-client-2.4.0: missing file /usr/local/share/google-api-php-client/vendor/google/apiclient-services/src/Google/Service/DLP/Resource/Organizations.php
Everything is working fine on 23.1.11 though.

Please be gently, I am a OPNsense noob , but I do have reasonable/good IT knowledge and networking knowledge. I would appreciate any suggestions on how to upgrade, I'd rather not have to wipe and re-install.
I've tried this four times now and each time it returns to 23.1.11_1 after downloading. However the audit DOES say that the kernel version is 23.7 ?

Code: [Select]

Currently running OPNsense 23.1.11_1 at Fri Aug  4 17:43:33 UTC 2023
>>> Check installed kernel version
Version 23.7 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 23.7 is correct
if anyone would like me to send / email the complete log file from the audit please let me know where to send it.

Thanks.

[newsense]

Log in via ssh and try this command, post the output if it doesn't complete the upgrade. You're half way there already.

Code: [Select]

opnsense-update -u

[lordxenu]

Hi @newsense

Thanks very much for your assistance.
I'm not sure what was different this time, but it appears to have worked 
The system is now reporting

OPNsense 23.7-amd64
FreeBSD 13.2-RELEASE-p1
OpenSSL 1.1.1u 30 May 2023

Thank you!!

[Taomyn]

Wanted to add my success status to the thread, upgraded from the last 23.1 to 23.7 without a problem. The only thing I did to prepare was to reconfigure Bind to listen on an IP (with ACLs) instead of 127.0.0.1 so that I could remove the "allow localhost" override in Unbound that was done through the 3rd party plugin to give me customised commands. Thought it would be much better to try to stick to built-in options when possible.

[Meshman]

HP T620 4gb ram
Upgrade went fine, just took a while ~15min. Patience is needed.

[zandrr]

I had an unfortunate issue with DNS not working properly locally after 23.1.11_1 > 23.7.
Notably it's virtualised on Proxmox (kernel 6.2.16-6). OpenvSwitch bridging with VLAN interfaces on *sense.
ISP is static with public DNS upstreams (eg 1.0.0.1, 1.1.1.1, 8.8.8.8 and ip6 equivalents).

Had to rollback, so didn't take the time to tshoot sorry. Just wondering if anyone else experienced something similar?

Cannot rule out config deviation of course, or some introduced quirk like MTU, but I played through Unbound a bit and the behaviour persisted (not that it appeared very rational in the first place). Also disabled ip6 entirely to rule out stack behaviour.

Have it running separately on a dedicated device with no issues to speak of... however that was fresh stock and not an upgrade install, so it's yet another variable. Might test again this weekend if no leads here.

[newsense]

23.7.1 should be released in the next 72 hours if I'm not mistaken and the upgrade path adjusted for it. The release notes might offer more insight once it is published.

[Cyberturtle]

Hi all,

anyone else had problems upgrading from 23.1 to 23.7 via SSH? I upgraded past Saturday.
I have logged in successfully via SSH and selected the menu option for updating. Afterwards I have typed in "23.7" and nothing happend. Tried again after rebooting. The only thing that happend was listing the release notes.
Upgrading via Web-GUI was flawless as always. Is this a common (known) problem?

Cyberturtle

[franco]

Confirming the release notes after reading(scrolling) via "q" then the upgrade starts. The console is a little tricky since it was asked for to show the release notes too.


Cheers,
Franco

[Cyberturtle]

Good to know, thx!