notification

Started by Julien, July 17, 2016, 02:37:22 AM

Previous topic - Next topic
Hi guys,
I have configured a load balancing using the next documents , https://docs.opnsense.org/manual/multiwan.html?highlight=multi
After I've configured had disabled one up link but the notification wasn't sent.
When I go to the notification and I send a test one smtp, the warning arrive to the email.
Can someone point me what I am doing wrong ?
OPNsense version is 16.7

Thank you
DEC4240 – OPNsense Owner

I think that there may be a misconception as the gateway monitoring tool will cause these mails to be sent, not "disabling" the interface, although it could be a language problem we're having. ;)

Pulling the cable is a more effective test.

Quote from: franco on July 20, 2016, 12:07:23 AM
I think that there may be a misconception as the gateway monitoring tool will cause these mails to be sent, not "disabling" the interface, although it could be a language problem we're having. ;)

Pulling the cable is a more effective test.
i am testing this on a virtual infrastructuur.
i couldn't pul the cable,
i've disconnected the NIC but it didnt sent the email either.
DEC4240 – OPNsense Owner