Port forwarding rule set up but blocked by Default Deny

[AF1E]

I have a port forwarding rule setup up but it is being blocked by a system rule "default deny / state violation rule"

What am I missing.

See attached image of the log.

Thanks for any help.

[Patrick M. Hausen]

Please post a screenshot of the complete settings of that port forwarding.

[AF1E]

Here are my rules.  See image.

[AF1E]

Updated with outbound rule.

[Patrick M. Hausen]

The detail screen you get when you click on "edit" for this particular port forwarding, please.

[AF1E]

See the detailed port forward rule in attached.

[Patrick M. Hausen]

RC_Server is an external address? Try to change the "Associated firewall rule" to "pass".

[AF1E]

I am hosting the RCServer on 192.168.1.143 .  I am attempting to set up Remotehams which connects to my ham radio and allows for me to connect remotely through the remote hams server with client software. See remotehams.com for information or see http://www.n8mdp.com/remotehams_pcr.php for a simple step by step setup.  Everything works fine when I connect with the client running on my lan using my local ip but the server sofware requires two ports to be port forwarded 4524 and 4525 (one for control and another for VOIP) to connect from outside my network. 

[Patrick M. Hausen]

The address in that port forwarding entry needs to be the external address, e.g. "WAN address", because that's what external systems will connect to. The port forwarding entry the forwards (hence the name) to your internal system. Also check the "pass" parameter I already mentioned.