Unexpected USB error upon upgrading to 22.1

[Lynxcat]

Hi,

Installed 21.7 on Beelink GK55, dual Realtek 1Gb, upgraded to 21.7.7, everything is fine using Logitech USB Keyboard K400+.

Upgraded to 21.7.8, final release, still OK

Upgraded to 22.1 and this keeps appearing on boot regardless of Logitech USB dongle is plugged or not, if plugged or later plugging Keyboard still works fine.  Goes through several cycles of USB errors/warnings and eventually stops as if nothing happened and GK55 seems to work fine.

Although non-fatal error/warning, it's quite annoying and a bit unsettling considering never happened with 21.7.x

Has anyone else experienced this and is there a fix.

Boot log:

uhub0: 16 ports with 16 removable, self powered
Root mount waiting for: usbus0
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)

End log segment.

Any thought on hoe to fix ?

[Lynxcat]

Ordered new Beelink GK55, reinstalled using leftmost USB3 port (the one opposite the power switch on the front faceplate) and problem never occurred, tried reinstall from scratch a couple of time and never re-cooured.

I was using the other USB3 port on the other GK55, either defective port or unit.

Case closed.