Sensei and LAGG (Teaming) Interface

[tracker]

I have a couple of installs of Sensei where it protects the LAGG interface by adding the individual interfaces that are part of the team to the Protected interfaces:

In this case, igb2 and igb3, and it works as expected, handles the VLANS on the LAGG interface, etc...

New install, hardware is slightly different (6 ports instead of 4). Same configuration for the LAGG and interfaces, but the adapters that are part of the LAGG interface do not show up on the available interfaces list to be selected:


Ideas? Suggestions?

[mb]

@tracker, my guess is that they are not set "enabled" in OPNsense / Interfaces menu?

[tracker]

Unfortunately, they are! I went through every option for the interface configuration between the box that works and the one that doesn't...

The interesting part is that the LAGG interface, despite being active, doesn't show up on the list of interfaces (on the box that works), but the individual ports do!

[mb]

@tracker, thanks for the update. Shoot a bug-report and team will have a detailed look.

[tracker]

Well, problem is fixed, at least on the offending machine. Some PHP bug that got squashed by SunnyValley awesome support! You guys rock!

Thanks for the quick response!

[wallacebw]

Running into a similar issue, but it only started after upgrading to: OPNsense 21.1.5-amd64, previous release worked.  No other config changes.   

Attached screenshot from Sensei interface

console shows the following interfaces

 LAN (lagg0_vlan1) -> v4: 10.0.1.254/24
 WAN (ixl0)      -> v4/DHCP4: <<public_IP>>
 WH_GUEST (lagg0_vlan10) -> v4: 10.0.10.254/24
 WH_INT (lagg0_vlan2) -> v4: 10.0.2.254/24
 WH_KIDS (lagg0_vlan3) -> v4: 10.0.3.254/24
 _Surveillance (lagg0_vlan500) -> v4: 172.17.1.254/24


Is there a patch available?

Thanks.

[sy]

Hi,
1.9 will be released this week and includes this fix.

[wallacebw]

Any updated ETA on 1.9?

[sy]

Hi,

It is in last step and will publish this week. Sorry for the delay.