APC UPS new plugin

[hloiter]

OK,

whats with the file apcupsd in /etc/rc.conf.d?

This file should contain apcupsd_enable="YES" ....

Cheers

hloiter

[Droid999]

Ok

Had a go at fixing some of the issues - still no idea on how to make this "official" or do a PR.

Fixed up so it should work with the latest version now - mine broke and wouldn't report the status anymore.

Added the file apcupsd.inc - it goes in "/usr/local/etc/inc/plugins.inc.d/" - this makes the apcupsd service appear in the Services widget on the dashboard.

I haven't got any problems with saving the config, and updating the apcupsd.conf file - so I can't find a fix there.

[hloiter]

Hmm, i think there is something wrong with the apcupsd.conf and some other files ....

After i copy the new version to my opnsense i can not start the service with the new apcupsd.conf.
When i replace the old one, then i can start the service but get no status anymore ...

Here is a screenshot:



With the new apcupsd.inc is the apcupsd service not shown in the service widget and the apcupsd.conf is not written new with klick on the button "Save Config" ....

Cheers

hloiter

[Droid999]

Did you grab the new script file to get the Status ?

You can grab them from here:

https://github.com/Gibbon99/apcupsd/tree/master/usr/local/opnsense/scripts/OPNsense/Apcupsd

and put them here:

Code: [Select]

/usr/local/opnsense/scripts/OPNsense/Apcupsd
Should be two files:

Code: [Select]

-rwxr-xr-x  1 root  wheel  366 Jun 20 16:16 getNisStatus.py*
-rwxr-xr-x  1 root  wheel  206 Jun 20 16:24 getServiceStatus.py*
root@firewall:/usr/local/opnsense/scripts/OPNsense/Apcupsd #
What happens when you run this from the command line?

Code: [Select]

configctl apcupsd getNisStatus

This is what I have to make it show up in the Services Widget

Code: [Select]

root@firewall:/usr/local/etc/inc/plugins.inc.d # ll apcupsd.inc
-rw-r--r--  1 root  wheel  2358 Jun 20 18:25 apcupsd.inc

It's not saving the config on my box anymore either. Just fails silently.

I'll chase it up.

[hloiter]

Will have a look at your hints and post a feedback as soon as possible.

hloiter

[hloiter]

Did you grab the new script file to get the Status ?

You can grab them from here:

https://github.com/Gibbon99/apcupsd/tree/master/usr/local/opnsense/scripts/OPNsense/Apcupsd

and put them here:

Code: [Select]

/usr/local/opnsense/scripts/OPNsense/Apcupsd
Should be two files:

Code: [Select]

-rwxr-xr-x  1 root  wheel  366 Jun 20 16:16 getNisStatus.py*
-rwxr-xr-x  1 root  wheel  206 Jun 20 16:24 getServiceStatus.py*
root@firewall:/usr/local/opnsense/scripts/OPNsense/Apcupsd #

Yes, i grab the new files and put them in the right directory.

What happens when you run this from the command line?

Code: [Select]

configctl apcupsd getNisStatus


And this happens when i call the file direct:

This is what I have to make it show up in the Services Widget

Code: [Select]

root@firewall:/usr/local/etc/inc/plugins.inc.d # ll apcupsd.inc
-rw-r--r--  1 root  wheel  2358 Jun 20 18:25 apcupsd.inc

Yes, the file is there but no APC UPS Service shown in the Service section ...



Have i to run something in the shell to activate it?

It's not saving the config on my box anymore either. Just fails silently.

I'll chase it up.

Cheers

hloiter

[i1mran92]

was it able to get it save and working again?

[Droid999]

Fixed the issue with the config not being saved.  Seems to be working properly now.

Also fixed the issue with the Status not showing.

I don't know why it's not showing in your Services widget - you could try > service configd restart - but I'm just guessing. or perhaps a  reboot might help  ?

[hloiter]

Hi Droid999,

thanks for your work.

Everything is fine now and working and up.

Cheers

hloiter

[mrzaz]

Hello,

I have joined Droid999's small team of developing the Apcupsd plugin and the current version in external repo works OK now. Have tried to help Droid999 to squash some issues found.

I am in the process to do some cleanup, preparing the plugin to be migrated into the official opnsense_plugin repo.  Have not planned a official date yet for the move as I may need some help with the GitHub migration so we don't screw anything up or loose some data. If someone is good in doing that, please contact us through PM. :-)

Best regards
Dan Lundqvist (mrzaz)

[Mario_Rossi]

Hi, sorry for the ignorance, I can't figure out how to have my ups detected and managed.
I have migrated from pfsense to opnsense and am not yet practical.

I have an APC SMT1500i with AP9630 network card.
In pfSense I had both Nut (snmp) and APCUPSD (pcnet).

I don't understand what I have to download and where I have to put it.


EDIT: Problem solved.
It would be nice to have a widget on the dashboard with ups status and battery charge as there was a pfsense

[xbb]

It would be nice to have a widget on the dashboard with ups status and battery charge as there was a pfsense

Hello, you can use my fork here: https://github.com/xbb/apcupsd (branch dev if you want to verify the code)

I have made improvements, it has a widget and if you check the releases I provide packages too.

I'm waiting for the other guys to merge the projects and possibly send a pull request to the official plugins repo.

Before installing the package I suggest you remove the previous version files and remove any manually applied modifications (apcupsd auto start, it's now controlled by the plugin)

Ignore the docs for the moment they need updating, download the package file and install it with: pkg install ./os-apcupsd-1.2.1.txz

[vladnik]

@Droid999, @mrzaz, @xbb

Hey guys, wanted to say thank you for working on this.

I have installed v1.2.2 of the package from @xbb's fork on OPNsense 22.1, works exactly as expected so far. I am connected to another server running apcupsd via the Ether and net options.

In the future, it would be interesting to expose these options through the GUI as well:

BATTERYLEVEL
MINUTES

With these two options one can fine tune when the system is shut down in the event of a power failure. The default settings of 3 minutes runtime left and 5% charge remaining are a little on the aggressive side.

Another thing to think about would be exposing the hosts.conf file somehow and integrate monitoring remote devices if OPNsense functions as a server for a USB connected UPS.

Sadly, I am not a programmer, so I cant help much in that area, but if you need further testing let me know.

Cheers!

[mrzaz]

Hi,
This could already be done if you click on "advance mode". 🙂

Best regards
Dan Lundqvist (mrzaz)

[vladnik]

Hi mrzaz,

wow, I'm stupid 

Anyway, just changed my settings and tested the auto shutdown, works perfectly!
The Dashboard widget also works without issues.

Thanks again for you guys's work, I highly recommend anyone with an APC UPS to check this out. Looking forward for this to become official 

Cheers!