20.7.4 - WAN interface blown away when suricata active...

[chemlud]

Hy!

Have a box with 4 interfaces (all em driver) running stable for more than a year. After updating to 20.7.4 the WAN interfaces comes up normally (get's IP via DHCP4), but after a few minutes the interfaces get's blown away, reboot helps only for 1-2 minutes:

Code: [Select]

2020-10-30T11:02:15 opnsense[93169] /usr/local/etc/rc.filter_configure: There were error(s) loading the rules: /tmp/rules.debug:186: no routing address with matching address family found. - The line in question reads [186]: pass out route-to ( em2 aaa.bbb.ccc.ddd ) from {em2} to {!(em2:network)} keep state allow-opts label "470b24148e83cbf020300f9a54691951" # let out anything from firewall host itself (force gw)
2020-10-30T11:02:15 opnsense[24319] /usr/local/etc/rc.linkup: Clearing states for stale wan route on em2
2020-10-30T11:02:15 opnsense[24319] /usr/local/etc/rc.linkup: DEVD Ethernet detached event for wan

"Prevent interface removal" is set for the WAN interface.

I disables suricata completely and now it's stable for some 10 min...

Any help? :-(

[mimugmail]

Was 20.7.3 the previous running version?

[chemlud]

Yes! Any way to get that kernel back? No time to mess around with the router these days...

[Gauss23]

Leave Suricata disabled until you have time to mess around with the router, if this is a stable solution.

[mimugmail]

Yes! Any way to get that kernel back? No time to mess around with the router these days...

https://docs.opnsense.org/manual/opnsense_tools.html

[chemlud]

Hi mimugmail!

I read there

Example 2:

The previous revert of strongswan was not the solution you expected so you try to completely revert to the previous OPNsense version:

# opnsense-revert -r 18.1.4 opnsense

Be aware to also check if there were kernel updates like above to also downgrade the kernel if needed!

...but don't really understand what the last sentence means. ?!?

And furthermore:

Warning

Before reverting a kernel please consult the forums or open an issue via Github. You should only revert kernels on test machines or when qualified team members advise you to do so!

...so is this really risky to revert back to 20.7.3?

Many thanks in advance!

[mimugmail]

Just revert the kernel, shouldnt be a problem

[franco]

# opnsense-update -kr 20.7.3

Reboot and it should be better in this case. Lock kernel package from GUI to avoid accidental overwrite in the next update.


Cheers,
Franco

[chemlud]

I get here:

Code: [Select]

# opnsense-update -kr 20.7.3                                     
Fetching kernel-20.7.3-amd64.txz: ...... done                                   
!!!!!!!!!!!! ATTENTION !!!!!!!!!!!!!!!                                         
! A critical upgrade is in progress. !                                         
! Please do not turn off the system. !                                         
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                                         
Installing kernel-20.7.3-amd64.txz... done                                     
Please reboot.   
After reboot I enabled suricata, but it took only about one minute to kill the WAN again. And then I saw that kernel is still 20.7.4?!? I disabled again suricata for the moment, any ideas what went wrong? opnsense-revert instead of opnsense-update, maybe?

[chemlud]

PS: The SSD has perfect SMART status, only 1130 h , not read-only.... What's the problem here?

[mimugmail]

Where do you see you have never kernel?

[chemlud]

Ooops! I thought that it's "base " under System -> Firmware -> Packages, but it's "kernel"! And "base" is 20.7.4, while kernel is 20.7.3.

So the kernel is apparently not the problem here! What else could cause the interface (and only the WAN interface) to disconnect with suricata enabled?

I enabled suricata for the different LAN interfaces, no problem. Only if WAN is included in suricata the WAN interface disconnects....

[mimugmail]

When you just use IDS it works?
Can you also revert Suri like within the docs?

[chemlud]

...in IDS mode with WAN it's stable for some 10 min now...

Should I revert suricata now? Or update the kernel and then revert suricata (to which version?)?

[mimugmail]

First revert Suricata