NAT=>Port Forword redirects to wrong address

[Paweł]

Hello everyone!!

I have 2 rules in "NAT=>Port Forward" section:
1. WAN   TCP   *   *   WAN address      554   192.168.13.64   554
2. WAN   TCP   *   *   xxx.xxx.xxx.101   554   192.168.17.2   554

xxx.xxx.xxx.101 is additional virtual address associated to WAN interface.

First rule works fine. Everything is ok.

Second rule is clone of first rule. I've change only "Destination".

When I try to connect port 554 on address xxx.xxx.xxx.101, the connection failed. "Live view" shows the connection was not redirected to "192.168.17.2" but "192.168.13.64".

I observed this same issue with "MS RDP" protocol. I've walk around the problem by changing port number and publishing all RDPs on "WAN address".

In this case, I can't change the port number, because it is hard-coded into application.

Does anyone have idea, how make it working? Thank for any advice...

Keep healthy

[muchacha_grande]

Hi,
what if you change the order.

Cheers...

[Paweł]

Hi

Thx for answer.

No effect.

I've tried to publish other services on virtual IPs only. Not working.

Only redirects from the "WAN address" work as expected.

Cheers...

[Patrick M. Hausen]

Is your virtual address of type "IP alias"?

[Paweł]

Yes. Of course.

[Fright]

try to view rules in Firewall-Diagnostics-pfInfo-Rules
may be some bug with "WAN address" alias or some...
try to use separate aliase for main IP, and new alias for virtual IP and write new forward rules.