No internet connection with WireGuard Road Warrior Setup

[keviiin]

Hello everyone,

I would like to setup a virtual homelab environment, using OPNsense as router.
All my LAN network traffic from inside the lab need to go out through a Wireguard VPN. This same LAN need to be accessible from the same Wireguard tunnel by other "clients" (like my laptop).

The WAN interface is another LAN where I can't open any port and I don't want to send Internet traffic on it, except Wireguard tunneled...

Here is a small schema showing the desired setup :


I have a Debian VPS acting as a Wireguard "Server", using the following config :

Code Select Expand


# VPS
[Interface]
Address = 10.8.0.1/24
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o ens3 -j MASQUERADE;
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o ens3 -j MASQUERADE;
ListenPort = 12345
PrivateKey = XXXXXXXXXXXXXXXXXXXXXX

# OPNsense
[Peer]
PublicKey = XXXXXXXXXXXXXXXXXXXXXX
AllowedIPs = 10.8.0.2/32

# Laptop
[Peer]
PublicKey = XXXXXXXXXXXXXXXXXXXXXX
AllowedIPs = 10.8.0.3/32


I've followed these tutorials from the docs https://wiki.opnsense.org/manual/how-tos/wireguard-client-azire.html and https://wiki.opnsense.org/manual/how-tos/wireguard-client-mullvad.html.

Here are my configuration on the OPNsense side :

Local :


Endpoint :


NAT/Outbound :



I'm able to ping the whole Wireguard network.
I'm able to traceroute IPs, showing that everything goes through the tunnel
I can't ping Internet IPs nor DNS names...
I can't visit any internet website...

I've tried to assign the interface, add gateways, change DNS,... nothing works...

Thanks very much in advance,

Kevin