NTP exiting on signal 15

Started by cbesener, March 20, 2020, 08:06:13 PM

Previous topic - Next topic
Eine meiner Opnsense will einfach nicht NTP sprechen :-)

NTP Server sind konfiguriert, Schnittstelle LAN eingetragen.

Aber jedesmal wenn man den Dienst startet stopt er sich wieder. Frage wieso?

Anbei ein Auszug aus dem Log:

2020-03-20T19:55:36   ntpd[98962]: 0.0.0.0 c01d 0d kern kernel time sync disabled
2020-03-20T19:55:36   ntpd[98962]: ntpd exiting on signal 15 (Terminated)
2020-03-20T19:55:35   ntpd[98962]: 0.0.0.0 c016 06 restart
2020-03-20T19:55:35   ntpd[98962]: 0.0.0.0 c012 02 freq_set kernel 87.154 PPM
2020-03-20T19:55:35   ntpd[98962]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
2020-03-20T19:55:35   ntpd[98962]: 0.0.0.0 c01d 0d kern kernel time sync enabled
2020-03-20T19:55:35   ntpd[98962]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
2020-03-20T19:55:35   ntpd[98962]: Listening on routing socket on fd #28 for interface updates
2020-03-20T19:55:35   ntpd[98962]: Listen normally on 7 re0_vlan2 10.0.32.253:123
2020-03-20T19:55:35   ntpd[98962]: Listen normally on 6 re0_vlan2 [fe80::201:2eff:fe91:f677%8]:123
2020-03-20T19:55:35   ntpd[98962]: Listen normally on 5 lo0 127.0.0.1:123
2020-03-20T19:55:35   ntpd[98962]: Listen normally on 4 lo0 [::1]:123
2020-03-20T19:55:35   ntpd[98962]: Listen normally on 3 re0 192.168.32.253:123
2020-03-20T19:55:35   ntpd[98962]: Listen normally on 2 re0 [fe80::201:2eff:fe91:f677%1]:123
2020-03-20T19:55:35   ntpd[98962]: Listen and drop on 1 v4wildcard 0.0.0.0:123
2020-03-20T19:55:35   ntpd[98962]: Listen and drop on 0 v6wildcard [::]:123
2020-03-20T19:55:35   ntpd[98962]: restrict: 'monitor' cannot be disabled while 'limited' is enabled
2020-03-20T19:55:35   ntpd[98962]: gps base set to 2020-03-08 (week 2096)
2020-03-20T19:55:35   ntpd[98962]: basedate set to 2020-03-05
2020-03-20T19:55:35   ntpd[98962]: proto: precision = 0.257 usec (-22)