English Forums > Hardware and Performance

PC Engines APU2 OpenVPN performance

(1/1)

molotch:
I recently bought an APU2 board hoping I could reach OpenVPN speeds close to 100 Mbps (using AES-GCM cipher) since that seems to be achievable with pfSense according to this article.

https://teklager.se/en/knowledge-base/apu2-vpn-performance/

Anyone here using the APU2 board that managed to get close to 100 Mbit in performance with OpenVPN or have any hints on what I could try to get closer? I am using an AES-GCM cipher and have tried increasing the send and receive buffers. No luck, I max out at about 60 Mbps up and 50 Mbps down.

Seems strange that pfSense should be that much faster. If I connect to the provider using OpenVPN on my computer I max out my connection of 150 Mbps both up and down. I test performance with the homepage www.bredbandskollen.se.

Steven:
Is your Power Savings set to mode Maximum for highest performance? I found that helped sometimes on APU2.

System>Settings>Miscellaneous>Power Savings
Use PowerD: checked on
Modes set to: Maximum

May need reboot, maybe not. I can't remember I no longer user my APU2.

Navigation

[0] Message Index