Nut for APC Pro 900 (option for a new PowerValue11RT 1kVA )

[vikozo]

Hello

i did install
os-nut (installed)   1.4

went to service --> Nut

give a Name "APC UPS Pro 900"
mode is standalone

select the UPS Type
APCSMART driver

Log is recognised the APC,
Apr 27 06:44:53   
kernel: ugen0.2: <American Power Conversion Back-UPS RS 900G FW879.L4 .I USB FWL4> at usbus0

Enable the APCSMART driver
Enable the nut service

but
nut_daemon   Network UPS Tools
nut_upsmon   Network UPS Monitor
both not running

root: /usr/local/etc/rc.d/nut_upsmon: WARNING: failed to start nut_upsmon

root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut

have a nice day
vinc

OPNsense 19.1.6-amd64
FreeBSD 11.2-RELEASE-p9-HBSD
LibreSSL 2.8.3

[mimugmail]

Remove space in name

[vikozo]

@mimugmail -  this helps a bit but still ....

nut_daemon   Network UPS Tools

Apr 27 21:26:39   root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut

i tryed also to change

port=usbus0
port=auto

have a nice day
vinc

[mimugmail]

Tried usbhid driver?

[vikozo]

yes i did  but nothing same error

and it is fine recognised a apc is connected

kernel: ugen0.2: <American Power Conversion Back-UPS RS 900G FW879.L4 .I USB FWL4> at usbus0

i also find out it is possible to activate more then a driver in the same time, but i did check it only one dirver was checked.

have a nice day
vinc

[vikozo]

i still got a error with nut

upsmon[31295]: UPS [APC_UPS-Pro-900]: connect failed: Connection failure: Operation timed out

[vikozo]

@mimugmail
any thing else i could do to help to solve this problem?
have a nice day
vinc

[mimugmail]

Have you tried plugging usb cable out and in again? Also reboot?

[vikozo]

yes i did - and get the feedback to have lost connection and found device again.
But then

nut_daemon   Network UPS Tools

  root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut

[vikozo]

because it is not working i have removed  the USB Port to APC 900 Pro and also deinstalled from the GUI NUT.
This 2 days ago but still i got two Informtion in the

System Log

May 14 09:27:00   upsmon[42091]: UPS APC_UPS-Pro-900 is unavailable

May 14 09:27:00   upsmon[42091]: UPS [APC_UPS-Pro-900]: connect failed: Connection failure: Operation timed out

so maybe there is something not ok, i also have rebootet the firewall still the information is there

[mimugmail]

pkg remove nut

[vikozo]

root@FW-03:~ # pkg remove nut
No packages matched for pattern 'nut'

Checking integrity... done (0 conflicting)
1 packages requested for removal: 0 locked, 1 missing

[vikozo]

@mimugmail
i found out my APC 900 Pro brake 
the firmware, and there is no why to upgrade it.   
 I will have to find a new UPS hope a ABB PowerValue11RT 1 kVA will work too.

have a nice day
vinc