Author Topic: IPSec DPD action not configurable (fixed setting is clear) (Read 4487 times)

jmalter · « **on:** February 15, 2019, 08:57:47 am »

In 19.1 also the IPSec DPD action is not configurable, which can resists in stalled IPSec tunnel.
We are using opnsense with about 16 IPsec Site-to-Site tunnel, but the dpdaction is a fixed setting to clear. That means if the tunnel fails, it will not be restarted. Why it is not possible to set this fixed to "restart" and or to set this via GUI?

Best regards

Joerg

jmalter · « **Reply #1 on:** March 06, 2019, 08:54:32 am »

Hi there,

is there any chance, that we get a additionally checkbox in src/www/vpn_ipsec_phase1.php for dpd_mode?
Standard could be clear and selectable should be restart.

Best regards

Joerg

franco · « **Reply #2 on:** March 06, 2019, 12:19:29 pm »

https://github.com/opnsense/core/issues

jmalter · « **Reply #3 on:** March 06, 2019, 12:20:39 pm »

Thanks, will create an issue entry

jeuler · « **Reply #4 on:** March 11, 2019, 05:45:10 pm »

Thanks for this topic. I'm currently in the phase of implementing various OPNsense boxes instead of IPcop and have been wondering why it is mostly the OPNsense-OPNsense VPN tunnels which don't come up again

franco · « **Reply #5 on:** March 12, 2019, 12:14:55 pm »

The thread is at https://github.com/opnsense/core/issues/3291

Cheers,
Franco

Author Topic: IPSec DPD action not configurable (fixed setting is clear) (Read 4487 times)

jmalter

IPSec DPD action not configurable (fixed setting is clear)

jmalter

Re: IPSec DPD action not configurable (fixed setting is clear)

franco

Re: IPSec DPD action not configurable (fixed setting is clear)

jmalter

Re: IPSec DPD action not configurable (fixed setting is clear)

jeuler

Re: IPSec DPD action not configurable (fixed setting is clear)

franco

Re: IPSec DPD action not configurable (fixed setting is clear)